MotherBoard Instrumentation
RemkoPr·airo-obin·V2/Main_PCB/MotherBoard_Instrumentation.kicad_pcb
About the MotherBoard Instrumentation PCB
MotherBoard Instrumentation is an open source PCB design by RemkoPr, published on GitHub. It is a 4-layer board measuring 25.7 × 30.2 mm, with 42 components from 31 distinct parts.
Other key parts include the ICM-42688-P, MCP73831-2ACI_MC, NINA-B306-00B and AP2112K-3.3TRG1. By type, the board carries 11 resistors, 10 connectors, 9 capacitors, 4 ICs, 3 diodes and 1 transistor.
It belongs with the robotics & motion and test & measurement designs in this gallery.
From the project
Modular readout PCB for instrumentation, i.e. sensorisation, of everyday objects to enhance learning of robot manipulation.
Main components on the MotherBoard Instrumentation
MotherBoard Instrumentation bill of materials (BOM)
42 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICM-42688-P | ICM_42668 | U1 |
| 1 | MCP73831-2ACI_MC | MCP73831 | U2 |
| 1 | NINA-B306-00B | XCVR_NINA-B306-00B | U3 |
| 1 | AP2112K-3.3TRG1 | AP2112K-3.3 | U4 |
| 1 | 2N7002 | SOT95P240X111-3N | Q2 |
| 1 | 1769 | CONN_S2B-PH-SM4-TB_JST | J1 |
| 4 | CONN_01X03_PIN Conn_01x03_Pin | 3_holes_castellated | J2, J4, J5, J8 |
| 1 | GT-USB-7025 | CONN16X1_GT-USB-7025_GSW | J3 |
| 2 | CONN_01X04_PIN Conn_01x04_Pin | castellated_hole_4 | J6, J9 |
| 1 | CONN_01X06_PIN Conn_01x06_Pin | 5_pads_2.54_pitch | J7 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | BLM18EG101TN1D | C_0603_1608Metric | FL1 |
| 1 | T3902 | MIC_T3902 | MK1 |
| 1 | SBR1A40S3 | Shotky_SOD2513X120N | SBR1 |
| 1 | PCM12SMTR | SW_PCM12SMTR | SW1 |
| 1 | C5156920 LED_RED | LED_0805_2012Metric | D1 |
| 1 | C455074 PRTR5V0U2AX,215 | ESD_PROT_SOT143B | D2 |
| 1 | C6067133 LED_BLUE | LED_0805_2012Metric | D3 |
| 2 | 4U7 4u7 | C_0402_1005Metric | C2, C5 |
| 4 | 100N 100n | C_0402_1005Metric | C4, C6, C7, C8 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4N7 4n7 | C_0402_1005Metric | C9 |
| 2 | 1n | C_0402_1005Metric | C10, C11 |
| 2 | 4.7K | R_0402_1005Metric | R1, R2 |
| 1 | C25077 10 ohm | R_0402_1005Metric | R3 |
| 1 | 13K | R_0402_1005Metric | R4 |
| 1 | C25130 600 ohm | R_0402_1005Metric | R5 |
| 1 | 1M | R_0402_1005Metric | R6 |
| 1 | 270K 270k | R_0402_1005Metric | R7 |
| 1 | 100K 100k | R_0402_1005Metric | R8 |
| 1 | 10K 10k | R_0402_1005Metric | R9 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R13, R18 |
MotherBoard Instrumentation design files
The KiCad project lives in the RemkoPr/airo-obin repository on GitHub; these links point at the commit this page was built from.
MotherBoard Instrumentation: common questions
How big is the MotherBoard Instrumentation PCB?
The MotherBoard Instrumentation measures 25.7 × 30.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the MotherBoard Instrumentation?
42 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MotherBoard Instrumentation design files?
From the RemkoPr/airo-obin repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MotherBoard Instrumentation design in my own project?
The repository has no license, so all rights stay with RemkoPr. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979