7 open source boards using the MCP73831-2ACI/MC
Real designs built with the MCP73831-2ACI/MC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Povbot2
wattnotions
65 × 30 mm25 parts2LNo license28ESP32
PrettySmallRobot
wattnotions
26 × 29 mm51 parts4LNo license23ESP32
Wristwearable
wlatif-cmyk
22.4 × 32.2 mm39 parts4LNo license8V2
Jaydosu
430 × 117.8 mm252 parts2LNo license0STM32
Flip phone
denglermoss
50 × 80 mm130 parts2LNo license0MotherBoard Instrumentation
RemkoPr
25.7 × 30.2 mm42 parts4LNo license0V2.3
Jaydosu
430 × 118.4 mm252 parts2LNo license0
How designs wire the MCP73831-2ACI/MC
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP73831-2ACI/MC connects to, and the resistors, capacitors and other passives placed on it.
- The PROG pin has a resistor to GND on 6 of 6 designs, most often 2 kΩ (then 13 kΩ).
- The STAT pin has a series resistor on 5 of 6 designs, most often 470 Ω (then 1.5 kΩ).
- The NC_7 pin is left unconnected on 6 of 6 designs.
- The VBAT pins have a decoupling capacitor on 4 of 6 designs, most often 4.7 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1, 2 | Connected to: VBUS 100% |
|
| VBATpin 3, 4 | Connected to: BATT 83% · a signal 17% |
|
| STATpin 5 | Connected to: Signal 100% |
|
| VSSpin 6 | Connected to: GND 100% | — |
| NC_7pin 7 | Connected to: Not connected 100% | — |
| PROGpin 8 | Connected to: Signal 100% |
|
| EPpin 9 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Povbot2 by wattnotions, PrettySmallRobot by wattnotions, Wristwearablepcb by wlatif-cmyk and Flip phone by denglermoss.
The MCP73831-2ACI/MC in open source designs
The gallery holds 7 open source boards using the MCP73831-2ACI/MC from 6 GitHub repositories; a typical one measures about 50 × 32.2 mm and carries around 51 components.
57% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Povbot2 by wattnotions.
What boards using the MCP73831-2ACI/MC are built for
MCP73831-2ACI/MC: common questions
Where can I find a MCP73831-2ACI/MC reference design?
Each of the 7 boards on this page is a real design using the MCP73831-2ACI/MC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MCP73831-2ACI/MC PROG pin?
The PROG pin has a resistor to GND on 6 of 6 designs, most often 2 kΩ (then 13 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP73831-2ACI/MC.
What resistor goes on the MCP73831-2ACI/MC STAT pin?
The STAT pin has a series resistor on 5 of 6 designs, most often 470 Ω (then 1.5 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP73831-2ACI/MC.
How is the MCP73831-2ACI/MC NC_7 pin connected?
The NC_7 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the MCP73831-2ACI/MC.
Which microcontrollers do boards using the MCP73831-2ACI/MC use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the MCP73831-2ACI/MC?
The median is 50 × 32.2 mm, and 57% are two-layer designs.
What is the most popular open source board using the MCP73831-2ACI/MC?
By GitHub stars, Povbot2 by wattnotions, with 28 stars.
Can I simulate one of these boards using the MCP73831-2ACI/MC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.