Irtouch rcv
RemkoPr·icra-2023-workshop-tactile-fingertips·cad/pcb/irtouch_rcv.kicad_pcb
About the Irtouch rcv PCB
Irtouch rcv is an open source PCB design by RemkoPr, published on GitHub. It is a 4-layer board measuring 42.8 × 43.1 mm, with 41 components from 4 distinct parts.
Other key parts include the 74HC4051PW,118. By type, the board carries 32 transistors, 4 ICs and 4 resistors.
It belongs with the robotics & motion designs in this gallery.
From the project
Demonstration videos and design files of tactile fingertips presented in the ICRA2023 Transferability in Robotics workshop
This folder contains PCB design files for both the receiver (irtouchled) as well as the tranmitter (irtouchrcv) tactile finger. Additionally, the design for the custom breakout flange (robotiqwristcoupling) PCB is provided. This PCB is set between the Robotiq I/O Coupling and the 2F-85 gripper itself. The arduinobreakout is a simple PCB to which female 0.1" pin headers are soldered. This PCB fits in the Arduinoholder found in cad/3d.
Main components on the Irtouch rcv
Irtouch rcv bill of materials (BOM)
41 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 74HC4051PW,118 | SOP65P640X110-16N | U1, U2, U3, U4 |
| 32 | Q_Photo_NPN | RCVR | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +24 |
| 1 | 9POS_INTERFACE | 9POS_INTERFACE | I1 |
| 4 | R | R0603 | R1, R2, R3, R4 |
Irtouch rcv design files
The KiCad project lives in the RemkoPr/icra-2023-workshop-tactile-fingertips repository on GitHub; these links point at the commit this page was built from.
Irtouch rcv: common questions
How big is the Irtouch rcv PCB?
The Irtouch rcv measures 42.8 × 43.1 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Irtouch rcv?
41 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Irtouch rcv design files?
From the RemkoPr/icra-2023-workshop-tactile-fingertips repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Irtouch rcv design in my own project?
The repository has no license, so all rights stay with RemkoPr. Use it as a reference, and ask the author before reusing the design.
More boards in icra-2023-workshop-tactile-fingertips
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979