Robotiq wrist coupling

RemkoPr·icra-2023-workshop-tactile-fingertips·cad/pcb/robotiq_wrist_coupling.kicad_pcb

Robotiq wrist coupling PCB layout, top view — open source board by RemkoPr

About the Robotiq wrist coupling PCB

Robotiq wrist coupling is an open source PCB design by RemkoPr, published on GitHub. It is a 2-layer board measuring 32.8 × 63.5 mm, with 28 components from 7 distinct parts.

Other key parts include the AP63205, HOLE and 10PIN_SPRING_HEADER. By type, the board carries 23 ICs, 4 capacitors and 1 inductor.

It belongs with the robotics & motion designs in this gallery.

From the project

Demonstration videos and design files of tactile fingertips presented in the ICRA2023 Transferability in Robotics workshop

This folder contains PCB design files for both the receiver (irtouchled) as well as the tranmitter (irtouchrcv) tactile finger. Additionally, the design for the custom breakout flange (robotiqwristcoupling) PCB is provided. This PCB is set between the Robotiq I/O Coupling and the 2F-85 gripper itself. The arduinobreakout is a simple PCB to which female 0.1" pin headers are soldered. This PCB fits in the Arduinoholder found in cad/3d.

Main components on the Robotiq wrist coupling

AP63205HOLE10PIN_SPRING_HEADER

Robotiq wrist coupling bill of materials (BOM)

28 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP63205
IC1
21
HOLE
U1, U2, U3, U4, U5, U6, U7, U8 +13
1
10PIN_SPRING_HEADER
U12
1
4µ7
L1
1
10µF
C1
1
100nF
C2
2
22µF
C3, C4

Robotiq wrist coupling design files

The KiCad project lives in the RemkoPr/icra-2023-workshop-tactile-fingertips repository on GitHub; these links point at the commit this page was built from.

Robotiq wrist coupling: common questions

How big is the Robotiq wrist coupling PCB?

The Robotiq wrist coupling measures 32.8 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Robotiq wrist coupling?

28 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Robotiq wrist coupling design files?

From the RemkoPr/icra-2023-workshop-tactile-fingertips repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Robotiq wrist coupling design in my own project?

The repository has no license, so all rights stay with RemkoPr. Use it as a reference, and ask the author before reusing the design.

More boards in icra-2023-workshop-tactile-fingertips

Similar boards