Arduino breakout

RemkoPr·icra-2023-workshop-tactile-fingertips·cad/pcb/arduino_breakout.kicad_pcb

Arduino breakout layout, top view — open source board by RemkoPr

About the Arduino breakout

Arduino breakout is an open source PCB design by RemkoPr, published on GitHub. It is a 2-layer board measuring 45.7 × 33 mm, with 6 components from 1 distinct parts.

Other key parts include the 15POS_INTERFACE.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Demonstration videos and design files of tactile fingertips presented in the ICRA2023 Transferability in Robotics workshop

This folder contains PCB design files for both the receiver (irtouchled) as well as the tranmitter (irtouchrcv) tactile finger. Additionally, the design for the custom breakout flange (robotiqwristcoupling) PCB is provided. This PCB is set between the Robotiq I/O Coupling and the 2F-85 gripper itself. The arduinobreakout is a simple PCB to which female 0.1" pin headers are soldered. This PCB fits in the Arduinoholder found in cad/3d.

Main components on the Arduino breakout

15POS_INTERFACE

Arduino breakout bill of materials (BOM)

6 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
6
15POS_INTERFACE
U1, U2, U3, U4, U5, U6

Arduino breakout design files

The KiCad project lives in the RemkoPr/icra-2023-workshop-tactile-fingertips repository on GitHub; these links point at the commit this page was built from.

Arduino breakout: common questions

How big is the Arduino breakout?

The Arduino breakout measures 45.7 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino breakout?

6 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Arduino breakout design files?

From the RemkoPr/icra-2023-workshop-tactile-fingertips repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Arduino breakout design in my own project?

The repository has no license, so all rights stay with RemkoPr. Use it as a reference, and ask the author before reusing the design.

More boards in icra-2023-workshop-tactile-fingertips

Similar boards