AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2)
renatorgr·Boards·AiO_Micro45_XIAO_C3/AiO_Micro45_XIAO_C3.kicad_pcb
About the AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2) PCB
AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2) is an open source PCB design by renatorgr, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 27.3 × 24.4 mm, with 9 components from 5 distinct parts.
Other key parts include the C2869734. By type, the board carries 4 connectors, 2 capacitors, 2 resistors and 1 IC.
It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.
From the project
Hardware and firmware for the AgOpenGPS AiO v4.5 autosteer boards: Teensy 4.1 firmware with its own web page (GPS, IMU, autosteer), a XIAO ESP32 Wi-Fi status page, XIAO adapter boards, and an Arduino Nano sprayer section controller. Works with AgOpenWeb and AgOpenGPS.
A small board (27.3 × 24.4 mm, 2 layers) that plugs into the second GPS socket ("Dual-Left", U11) of the AiO v4.5 Micro, in place of a simpleRTK2B Micro, and connects a Seeed XIAO ESP32C3 (or ESP32S3) to the Teensy's Serial2 (pins 7 and 8). The XIAO plugs into two female headers on the adapter.
The plug is two 1x10 male headers: J1 = socket pins 1–10, J2 = socket pins 11–20 (J2 pin 1 = socket pin 11). The XIAO plugs into two 1x7 female headers: J3 = XIAO pins 1–7 (D0–D6), J4 = XIAO pins 8–14 (D7–5V).
Main components on the AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2)
AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2) bill of materials (BOM)
9 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2869734 LM66100DCKR | SOT-363_SC-70-6 | U2 |
| 2 | C2905956 PZ200-1-10-Z (1x10 male 2.00 mm) | Plug_1x10_P2.00mm_Bottom | J1, J2 |
| 2 | C2897370 PM254-1-07-Z-8.5 (1x07 female 2.54 mm) | Socket_1x07_P2.54mm_XIAO | J3, J4 |
| 2 | C45783 22uF | C_0805_2012Metric | C1, C2 |
| 2 | C17513 1k | R_0805_2012Metric | R1, R2 |
AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2) design files
The KiCad project lives in the renatorgr/Boards repository on GitHub; these links point at the commit this page was built from.
AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2): common questions
How big is the AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2) PCB?
The AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2) measures 27.3 × 24.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2)?
9 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2) design files?
From the renatorgr/Boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AiO v4.5 Micro - XIAO ESP32C3 adapter (GPS2 / Serial2) design in my own project?
Yes, under the terms of its GPL-3.0 license, which renatorgr chose for the repository.
More boards in Boards
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k