AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2)
renatorgr·Boards·AiO_Std45_XIAO_C3/AiO_Std45_XIAO_C3.kicad_pcb
About the AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2) PCB
AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2) is an open source PCB design by renatorgr, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 52.6 mm, with 9 components from 7 distinct parts.
By type, the board carries 5 connectors, 2 resistors, 1 diode and 1 capacitor.
It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.
From the project
Hardware and firmware for the AgOpenGPS AiO v4.5 autosteer boards: Teensy 4.1 firmware with its own web page (GPS, IMU, autosteer), a XIAO ESP32 Wi-Fi status page, XIAO adapter boards, and an Arduino Nano sprayer section controller. Works with AgOpenWeb and AgOpenGPS.
A small board (40.0 × 52.6 mm overall, 2 layers, cut away where the Bynav / UM982 module goes) that plugs into the second GPS socket (GPS2, "F9P RelPosNED") of the AiO v4.5 Standard, in place of a second simpleRTK2B, and connects a Seeed XIAO ESP32C3 (or ESP32S3) to the Teensy's Serial2 (pins 7 and 8). The XIAO plugs into two female headers on the adapter.
- XIAO ESP32C3: D6 = GPIO21 (TX), D7 = GPIO20 (RX). - XIAO ESP32S3: D6 = GPIO43 (TX), D7 = GPIO44 (RX).
AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2) bill of materials (BOM)
9 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2937625 PZ254V-11-03P (1x03 male 2.54 mm) | Plug_1x03_P2.54mm_Bottom | J1 |
| 1 | C492407 PZ254V-11-08P (1x08 male 2.54 mm) | Plug_1x08_P2.54mm_Bottom | J2 |
| 1 | C492405 PZ254V-11-06P (1x06 male 2.54 mm) | Plug_1x06_P2.54mm_Bottom | J3 |
| 2 | C2897370 PM254-1-07-Z-8.5 (1x07 female 2.54 mm) | Socket_1x07_P2.54mm_XIAO | J4, J5 |
| 1 | C8598 B5819W | D_SOD-123 | D1 |
| 1 | C45783 22uF | C_0805_2012Metric | C1 |
| 2 | C17513 1k | R_0805_2012Metric | R1, R2 |
AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2) design files
The KiCad project lives in the renatorgr/Boards repository on GitHub; these links point at the commit this page was built from.
AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2): common questions
How big is the AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2) PCB?
The AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2) measures 40 × 52.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2)?
9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2) design files?
From the renatorgr/Boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AiO v4.5 Standard - XIAO ESP32C3 adapter (GPS2 / Serial2) design in my own project?
Yes, under the terms of its GPL-3.0 license, which renatorgr chose for the repository.
More boards in Boards
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k