Kicad project
rflab·NixieClock_3·files/circuit/kicad/_kicad_project.kicad_pcb
About the Kicad project PCB
Kicad project is an open source AVR/Arduino PCB design by rflab, published on GitHub. It is a 2-layer board measuring 100 × 53 mm, with 108 components from 54 distinct parts.
Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the IC_16PIN, IC_4PIN, SN74141_K155NA, TLP627-4 and MY_3_TERMINAL_REGULATOR. By type, the board carries 31 ICs, 31 resistors, 19 capacitors, 5 switches, 5 diodes and 4 relays.
It belongs with the displays & leds designs in this gallery.
From the project
nixie clock ver.3
ソースコードと回路図、Atmel AVR ATMEGA328使用 回路バグやソフトが未完成などは残ってます。

Main components on the Kicad project
Kicad project bill of materials (BOM)
108 components, 54 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA328-A | TQFP32 | IC1 |
| 1 | IC_16PIN | my_so16 | IC2 |
| 2 | IC_4PIN | my_dip4 | IC3, IC4 |
| 1 | SN74141_K155NA | my_dip16 | IC5 |
| 2 | TLP627-4 | my_dip16 | IC6, IC7 |
| 1 | MY_3_TERMINAL_REGULATOR | my_SOT223 | IC8 |
| 1 | ICM7555CD | so-8 | IC9 |
| 1 | FET | my_sot428 | IC10 |
| 1 | DS1307 | so-8 | IC11 |
| 1 | LPS331AP | my_dip8 | IC12 |
| 1 | AM2321 | my_am2321 | IC13 |
| 4 | NEON | my_neon | U1, U2, U3, U4 |
| 6 | NIXIE_IN_16 | my_nixie | U5, U6, U7, U8, U9, U10 |
| 1 | DC_JACK | my_dcjack | U11 |
| 1 | LOAD | my_sounder | U12 |
| 1 | remocon | my_remocon | U13 |
| 1 | napion | my_napion | U14 |
| 4 | MY_PIN52 | my_pin52 | U15, U16, U17, U18 |
| 1 | 12MHz | my_crystal | X1 |
| 1 | 32.768kHz | my_crystal_32p768 | X2 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB_MINI_B | my_usb_mini_b | CON1 |
| 1 | CONN_6 | my_connector_6 | P1 |
| 1 | FUSE | SM1206 | F1 |
| 4 | CONN_3 | my_3pin | K1, K2, K3, K4 |
| 1 | PHOTO_DIODE | my_photo_diode | PD1 |
| 4 | SW_PUSH | my_tact_switch | SW1, SW3, SW4, SW5 |
| 1 | EVQWK | my_rotary_switch | SW2 |
| 2 | 2SC | SOT23 | T1, T2 |
| 1 | 2SA | SOT23 | T3 |
| 1 | 100k | my_SMD_VR | VR1 |
| 1 | 10k | my_SMD_VR | VR2 |
| 1 | VAL** | my_drill_3mm | my_drill_3mm |
| 4 | DIODE | SM0805 | D1, D3, D4, D5 |
| 1 | DIODE | SM1206POL | D2 |
| 1 | 220uH | my_inductor | L1 |
| 11 | 0.1u | SM0603_Capa | C1, C2, C6, C8, C9, C10, C15, C16 +3 |
| 1 | 10u | SM0805 | C3 |
| 2 | 22p | SM0603_Capa | C4, C5 |
| 2 | 25V 10u | SM0805 | C7, C11 |
| 1 | 1000p | SM0603_Capa | C12 |
| 1 | 350V 1u | my_SMD5750 | C13 |
| 1 | 5.5V 0.1F | my_double_layer_capacitor | C14 |
| 1 | 510 | SM0805 | R1 |
| 1 | 1k | SM0805 | R2 |
| 15 | 10k | SM0805 | R3, R4, R5, R7, R8, R11, R12, R13 +7 |
| 1 | 330 | SM0805 | R6 |
| 4 | 500k | SM0805 | R9, R10, R17, R18 |
| 1 | 4.7k | SM0805 | R16 |
| 2 | 68 | SM0805 | R20, R21 |
| 1 | 2K | SM0805 | R22 |
| 1 | NC | SM0805 | R23 |
| 1 | 3.3k | SM0805 | R27 |
| 1 | 7.5k | SM0805 | R28 |
| 2 | N/A | SM0805 | R30, R31 |
Kicad project design files
The KiCad project lives in the rflab/NixieClock_3 repository on GitHub; these links point at the commit this page was built from.
Kicad project: common questions
What microcontroller does the Kicad project use?
The Kicad project is built around the ATMEGA328-A, from the AVR/Arduino family.
How big is the Kicad project PCB?
The Kicad project measures 100 × 53 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad project?
108 components, from 54 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad project design files?
From the rflab/NixieClock_3 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Kicad project design in my own project?
The repository has no license, so all rights stay with rflab. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kicad project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k