16 open source boards using the DS1307
Real designs built with the DS1307, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Ultra DB X51 v1
ExploreEmbedded
178 × 145 mm132 partsBSD-3-Clause70MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license25MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license17AVR/Arduino
Nixie control board
shengwen-tw
183.8 × 59.4 mm61 parts2LMIT9MCU BaseBoard
AhmedElwakeel
180 × 125 mm146 parts2LNo license1OneMicro-Base-Board
ExploreEmbedded
180 × 135 mm143 parts2LNo license1MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license0MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license0AVR/Arduino
Rfpirate
s3c
56.1 × 93 mm137 parts4LNo license0Ultra DB X51 v1
shivamag00
178 × 145 mm132 partsNo license0AVR/Arduino
Kicad project
rflab
100 × 53 mm108 parts2LNo license0AVR/Arduino
ProgrammableRelayModule4Channel
numato
91 × 82 mm72 parts2LNo license143AVR/Arduino
Repaper
wyolum
3.8 × 27.9 mm97 parts2LNo license1AVR/Arduino
ProgrammableRelayModule2Channel
numato
100 × 60 mm64 parts2LNo license143Ds1307 board
shengwen-tw
53 × 23.9 mm5 parts2LMIT9Ds1307
zymaxcii
30.4 × 24.1 mm10 parts16LNo license1
How designs wire the DS1307
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the DS1307 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a crystal on 13 of 14 designs, most often 32.768 kHz.
- Pin 2 has a crystal on 13 of 14 designs, most often 32.768 kHz.
- Pin 5 has a pull-up to 5V on 12 of 14 designs, most often 3.3 kΩ (then 10 kΩ).
- Pin 6 has a pull-up to 5V on 12 of 14 designs, most often 3.3 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| Pin 2 | Connected to: Signal 100% |
|
| Pin 4 | Connected to: GND 100% | — |
| Pin 5 | Connected to: 24C16 57%, the microcontroller 29%, a connector 21% |
|
| Pin 6 | Connected to: 24C16 57%, the microcontroller 29%, a connector 21% |
|
| Pin 8 | Connected to: 5V 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ProgrammableRelayModule2Channel by numato, Ultra DB X51 v1 by ExploreEmbedded, MCU BaseBoard by ExploreEmbedded and MCU BaseBoard by ExploreEmbedded.
The DS1307 in open source designs
The gallery holds 16 open source boards using the DS1307 from 14 GitHub repositories; a typical one measures about 178 × 109 mm and carries around 132 components.
86% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.
The most starred is ProgrammableRelayModule4Channel by numato.
Parts used alongside the DS1307
Microcontrollers on boards using the DS1307
What boards using the DS1307 are built for
DS1307: common questions
Where can I find a DS1307 reference design?
Each of the 16 boards on this page is a real design using the DS1307. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DS1307 pin 1 connected?
Pin 1 has a crystal on 13 of 14 designs, most often 32.768 kHz. Counted from the KiCad layouts of 14 open source designs using the DS1307.
How is the DS1307 pin 2 connected?
Pin 2 has a crystal on 13 of 14 designs, most often 32.768 kHz. Counted from the KiCad layouts of 14 open source designs using the DS1307.
What pull-up resistor is used on the DS1307 pin 5?
Pin 5 has a pull-up to 5V on 12 of 14 designs, most often 3.3 kΩ (then 10 kΩ). Counted from the KiCad layouts of 14 open source designs using the DS1307.
What parts are used alongside the DS1307?
The 24C16, L293D, 7805, LCD-jhd12864e-xl and LM1117 appear in the most repositories here.
Which microcontrollers do boards using the DS1307 use?
Most are built on AVR/Arduino (6).
How big is a typical board using the DS1307?
The median is 178 × 109 mm, and 86% are two-layer designs.
What is the most popular open source board using the DS1307?
By GitHub stars, ProgrammableRelayModule4Channel by numato, with 143 stars.
Can I simulate one of these boards using the DS1307 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.