HardLabs

RF-2.4GHz-14-channel scanner-Hardware

RHAD1969·RF-2.4GHz-14-channel-scanner-Hardware

RF-2.4GHz-14-channel scanner-Hardware PCB layout, top view — open source ESP32 board by RHAD1969

About the RF-2.4GHz-14-channel scanner-Hardware PCB

RF-2.4GHz-14-channel scanner-Hardware is an open source ESP32 PCB design by RHAD1969, published on GitHub. It is a 2-layer board measuring 42.7 × 37.6 mm, with 28 components from 16 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LM66200DRLR and 6206A33. By type, the board carries 17 resistors, 3 ICs, 3 connectors, 3 capacitors and 2 switches.

Main components on the RF-2.4GHz-14-channel scanner-Hardware

LM66200DRLRESP32-S3-WROOM-16206A33

RF-2.4GHz-14-channel scanner-Hardware bill of materials (BOM)

28 components, 16 distinct parts.

QtyPartRefs
1
LM66200DRLR
IC1
1
ESP32-S3-WROOM-1
U1
1
6206A33
U2
1
RHAD_USB4056-03-A_REVA2
J2
1
MSD-7-A
J3
1
Conn_01x22_Pin
J4
1
SWT0220-016016GSA
S1
1
SWT0220-016016GSA
Boot
S2
1
22µF
C1
1
.1µF
C2
1
10µF
C3
1
10kΩ
R1
2
5.1kΩ
R2, R3
2
1kΩ
R4, R5
6
20kΩ
R6, R7, R8, R14, R16, R18
6
22Ω
R10, R11, R12, R13, R15, R17

RF-2.4GHz-14-channel scanner-Hardware design files

The KiCad project lives in the RHAD1969/RF-2.4GHz-14-channel-scanner-Hardware repository on GitHub; these links point at the commit this page was built from.

RF-2.4GHz-14-channel scanner-Hardware: common questions

What microcontroller does the RF-2.4GHz-14-channel scanner-Hardware use?

The RF-2.4GHz-14-channel scanner-Hardware is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the RF-2.4GHz-14-channel scanner-Hardware PCB?

The RF-2.4GHz-14-channel scanner-Hardware measures 42.7 × 37.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RF-2.4GHz-14-channel scanner-Hardware?

28 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the RF-2.4GHz-14-channel scanner-Hardware design files?

From the RHAD1969/RF-2.4GHz-14-channel-scanner-Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RF-2.4GHz-14-channel scanner-Hardware design in my own project?

The repository has no license, so all rights stay with RHAD1969. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RF-2.4GHz-14-channel scanner-Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards