30 open source boards using the LM66200DRLR
Real designs built with the LM66200DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Soleil hardware
protolux-electronics
65 × 30 mm66 parts4LCERN-OHL-P-2.022RP2040/RP2350
RP2040GPSTracker
justsem
99.6 × 53 mm128 parts2LCC-BY-SA-4.011ESP32
Bms
membaye
106 × 74 mm211 parts4LNo license1ESP32
OneroiV1
HomeOnDuna
50 × 75 mm160 parts4LNo license1ESP32
Ricardo-FlintandSteel
icl-rocketry
44 × 58 mm127 parts4LMIT1AQEYE-SB-D1
CIRCUITSTATE
80 × 30 mm65 parts2LMIT1AVR/Arduino
CPRPal
Will946
78.8 × 71.9 mm41 parts2LMIT1Compact tablet
CopperPilot
28 × 125 mm385 parts8LCERN-OHL-S-2.00ESP32
Ricardo-Stark
icl-rocketry
117 × 49 mm298 parts6LNo license0ESP32
Pump controller hardware
UWARG
99.5 × 69 mm240 parts4LNo license0STM32
EPS
MatthiasGeorgImhof
80 × 80 mm238 parts4LCC-BY-NC-4.00ESP32
Ricardo-Kermit
icl-rocketry
85 × 43 mm194 parts4LMIT0IWR-AOP-MODULE
l3wi
85.6 × 33.7 mm142 parts6LMIT0ESP32
Ricardo-Hermes
icl-rocketry
43 × 65 mm114 parts4LNo license0ESP32
Ricardo-Chad
icl-rocketry
30 × 60 mm113 parts4LMIT0STM32
SPAR
HazzerTheGreat
48 × 58 mm104 parts6LNo license0RP2040/RP2350
OWL - Rotor v2
sedlak477
60 × 60 mm104 parts4LCERN-OHL-P-2.00ESP32
Smart peltier driver esp32-v1
manhoosbilli1
94 × 48.1 mm84 parts2LNo license0ESP32
Ricardo-Pete
icl-rocketry
61 × 37 mm82 parts4LNo license0ESP32
Aquarius node hw
crgmakes
50 × 50 mm81 parts4LCC-BY-SA-4.00ESP32
Ricardo-BlackBox
icl-rocketry
80.3 × 54.1 mm69 parts4LNo license0Nordic nRF
Mouse
GKevinLi
45 × 62.7 mm68 parts4LNo license0ESP32
ARC Reactor
SuperMK15
67.9 × 70 mm41 parts4LNo license0ESP32
SerialTap
tfindlay-au
54 × 22 mm33 parts4LCERN-OHL-P-2.00ESP32
Esp32-ble sensor
philipcristiano
27.5 × 89 mm29 parts2LNo license0ESP32
RF-2.4GHz-14-channel scanner-Hardware
RHAD1969
42.7 × 37.6 mm28 parts2LNo license0RP2040/RP2350
GMM-7550 USB3 Adapter
GMM-7550
75 × 50 mm198 parts4LNo license36Flight computer
Purdue-Space-Program
78 × 67 mm102 parts4LNo license2ESP32
Ricardo-BlackBoxNEW
icl-rocketry
49.9 × 46.6 mm69 parts4LNo license0ESP32
Ricardo-BlackBoxNEWFinal
icl-rocketry
62 × 32 mm63 parts4LNo license0
How designs wire the LM66200DRLR
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the LM66200DRLR connects to, and the resistors, capacitors and other passives placed on it.
- The ON pin is tied to GND on 23 of 28 designs (a signal on 4).
- The VOUT pins have a capacitor to GND on 19 of 28 designs, most often 10 µF (then 1 µF).
- The VIN1 pin has a decoupling capacitor on 12 of 28 designs, most often 1 µF (then 22 µF).
- The VIN2 pin has a capacitor to GND on 12 of 28 designs, most often 22 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 5 | Connected to: GND 98% | — |
| VOUTpin 2, 7 | Connected to: MAX77827AEFD+T 25% · 5V 47% |
|
| VIN1pin 3 | Connected to: VBUS 68% · a signal 32% |
|
| ONpin 4 | Connected to: GND 82% | — |
| VIN2pin 6 | Connected to: A connector 43% · 3.3V 43% |
|
| STpin 8 | Connected to: Signal 70% · not connected 30% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GMM-7550 USB3 Adapter by GMM-7550, Soleil hardware by protolux-electronics, RP2040GPSTracker by justsem and Flight computer by Purdue-Space-Program.
The LM66200DRLR in open source designs
The gallery holds 30 open source boards using the LM66200DRLR from 28 GitHub repositories; a typical one measures about 63.5 × 56 mm and carries around 103 components.
80% use four copper layers or more, and 40% carry an open source license.
The most starred is GMM-7550 USB3 Adapter by GMM-7550.
Parts used alongside the LM66200DRLR
Microcontrollers on boards using the LM66200DRLR
What boards using the LM66200DRLR are built for
LM66200DRLR: common questions
Where can I find a LM66200DRLR reference design?
Each of the 30 boards on this page is a real design using the LM66200DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM66200DRLR ON pin connected?
The ON pin is tied to GND on 23 of 28 designs (a signal on 4). Counted from the KiCad layouts of 28 open source designs using the LM66200DRLR.
How is the LM66200DRLR VOUT pin connected?
The VOUT pins have a capacitor to GND on 19 of 28 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 28 open source designs using the LM66200DRLR.
What decoupling capacitors do designs use on the LM66200DRLR VIN1 pin?
The VIN1 pin has a decoupling capacitor on 12 of 28 designs, most often 1 µF (then 22 µF). Counted from the KiCad layouts of 28 open source designs using the LM66200DRLR.
What parts are used alongside the LM66200DRLR?
The ESP32-S3, MAX77827AEFD+T, SN65HVD230, SC4215 and USBLC6-2P6 appear in the most repositories here.
Which microcontrollers do boards using the LM66200DRLR use?
Most are built on ESP32 (18), RP2040/RP2350 (3), STM32 (2) and AVR/Arduino (1).
How big is a typical board using the LM66200DRLR?
The median is 63.5 × 56 mm, and 20% are two-layer designs.
What is the most popular open source board using the LM66200DRLR?
By GitHub stars, GMM-7550 USB3 Adapter by GMM-7550, with 36 stars.
Can I simulate one of these boards using the LM66200DRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.