SEthernet/30 PDS Ethernet card for Macintosh SE/30
rhalkyard·SEthernet·boards/se30/se30.kicad_pcb
About the SEthernet/30 PDS Ethernet card for Macintosh SE/30 PCB
SEthernet/30 PDS Ethernet card for Macintosh SE/30 is an open source PCB design by rhalkyard, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 116.8 × 121.8 mm, with 43 components from 22 distinct parts.
Other key parts include the SST39SF010, ENC624J600-PT, ATF1502AS-xAx44 and LD1117S33TR_SOT223. By type, the board carries 22 capacitors, 11 resistors, 4 ICs, 3 connectors, 1 crystal and 1 inductor.
It belongs with the retro computing designs in this gallery.
From the project
Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30
Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30.
It's an unfortunate reality of retrocomputing that, as time goes on, original hardware only ever becomes more scarce, and usually more expensive.
While PDS ethernet cards are certainly not scarce yet, the collector appeal of Compact Macs means that cards are in high demand, with consequent high prices. As of this writing (October 2023), the going eBay rate for them seems to be of the order of $US 150-200, which is a bit steep for those of us who remember finding them in electronics-recycler dollar bins.
Main components on the SEthernet/30 PDS Ethernet card for Macintosh SE/30
SEthernet/30 PDS Ethernet card for Macintosh SE/30 bill of materials (BOM)
43 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SST39SF010 | TSOP-I-32_12.4x8mm_P0.5mm | U1 |
| 1 | ENC624J600-PT | TQFP-64_10x10mm_P0.5mm | U2 |
| 1 | ATF1502AS-xAx44 | TQFP-44_10x10mm_P0.8mm | U4 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U5 |
| 1 | 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | Mac SE/30 PDS Interface | DIN41612_C_3x40_Male_Horizontal_THT | J1 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x04_P2.54mm_Horizontal | J2 |
| 1 | Mac SE/30 PDS Interface | DIN41612_C_3x40_Female_Horizontal_THT | J4 |
| 1 | PT61017PEL | Transformer_Ethernet_Bourns_PT61017PEL | TR1 |
| 1 | FerriteBead | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 8 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6, C8, C11, C15, C18, C19, C21 |
| 5 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C13, C14, C22 |
| 2 | 18pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 0.01uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C16 |
| 2 | 6.8nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C12 |
| 2 | 10uF | CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C10, C23 |
| 1 | 1000pF 2KV | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C20 |
| 1 | 12.4K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 4 | 49.9 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R5, R7 |
| 3 | 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R10, R11 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10R 1/12W | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 2 | 75 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
SEthernet/30 PDS Ethernet card for Macintosh SE/30 design files
The KiCad project lives in the rhalkyard/SEthernet repository on GitHub; these links point at the commit this page was built from.
- Layoutboards/se30/se30.kicad_pcb
- Schematicboards/se30/se30.kicad_sch
SEthernet/30 PDS Ethernet card for Macintosh SE/30: common questions
How big is the SEthernet/30 PDS Ethernet card for Macintosh SE/30 PCB?
The SEthernet/30 PDS Ethernet card for Macintosh SE/30 measures 116.8 × 121.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SEthernet/30 PDS Ethernet card for Macintosh SE/30?
43 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the SEthernet/30 PDS Ethernet card for Macintosh SE/30 design files?
From the rhalkyard/SEthernet repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SEthernet/30 PDS Ethernet card for Macintosh SE/30 design in my own project?
Yes, under the terms of its GPL-3.0 license, which rhalkyard chose for the repository.
More boards in SEthernet
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k