Nearless back
rhinocerose·eurorack-1U-nearless·kicad/nearless_back_pcb.kicad_pcb
About the Nearless back PCB
Nearless back is an open source PCB design by rhinocerose, published on GitHub. It is a 2-layer board measuring 50 × 22.2 mm, with 27 components from 9 distinct parts.
Other key parts include the LME49720. By type, the board carries 10 resistors, 8 capacitors, 5 connectors, 2 ICs and 2 diodes.
It belongs with the audio designs in this gallery.
From the project
1U Intellijel Rework of Nearness. 10hp.
This is a small Intellijel 1U rework of Nearness designed by Jesper Särnesjö.
Minimal panning mixer for the Eurorack modular synthesizer system. Five inputs, two outputs. The closer an input is to either side, the greater its panning in that direction. 10hp.
Nearness is a product of the llllllll community.
The module has been redesigned to fit an Intellijel 1U in 10hp, so there are two fewer inputs. Why 10hp? That's all I had free! :)

Main components on the Nearless back
Nearless back bill of materials (BOM)
27 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LME49720 | SOIC-8 | U1, U2 |
| 4 | CONN_01X03 | Pin_1x3 | P5, P6, P9, P11 |
| 1 | CONN_01X03 | Eurorack_2x5 | P7 |
| 2 | 1N5819HW | SOD-123 | D1, D2 |
| 2 | 22P 22p | 0805 | C1, C2 |
| 2 | 22U 22u | 0805 | C3, C4 |
| 4 | 100N 100n | 0805 | C5, C6, C7, C8 |
| 8 | 100K 100k | 0805 | R15, R16, R17, R18, R19, R20, R21, R22 |
| 2 | 1k | 0805 | R23, R24 |
Nearless back design files
The KiCad project lives in the rhinocerose/eurorack-1U-nearless repository on GitHub; these links point at the commit this page was built from.
Nearless back: common questions
How big is the Nearless back PCB?
The Nearless back measures 50 × 22.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nearless back?
27 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Nearless back design files?
From the rhinocerose/eurorack-1U-nearless repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Nearless back design in my own project?
The repository has no license, so all rights stay with rhinocerose. Use it as a reference, and ask the author before reusing the design.
More boards in eurorack-1U-nearless
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687