9 open source boards using the LME49720

Real designs built with the LME49720, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the LME49720

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LME49720 connects to, and the resistors, capacitors and other passives placed on it.

  • The - pins have a series resistor on 7 of 7 designs, most often 1 kΩ (then 100 kΩ).
  • Pin 1 has a series resistor on 6 of 7 designs, most often 100 kΩ (then 22 kΩ).
  • Pin 7 has a series resistor on 6 of 7 designs, most often 100 kΩ (then 22 kΩ).
  • Pin 8 is tied to 12V on 7 of 7 designs.
Pin 1Connected to: Signal 100%
  • Series resistor on 86% · 100 kΩ (6), 22 kΩ (3)
  • Series capacitor on 43% · 10 µF (3), 150 pF (2)
-pin 2, 6Connected to: A connector 36%
  • Series resistor on 100% · 1 kΩ (10), 100 kΩ (10)
  • Series capacitor on 57% · 150 pF (4), 22 pF (1)
+pin 3, 5Connected to: Signal 57% · GND 43%
  • Capacitor to GND on 43% · 150 pF (4)
  • Series resistor on 43% · 1 kΩ (6)
Pin 4Connected to: -12V 57% · GND 43%
  • Decoupling capacitor on 43% · 100 nF (3)
Pin 7Connected to: Signal 100%
  • Series resistor on 86% · 100 kΩ (4), 22 kΩ (3), 1 kΩ (1)
  • Series capacitor on 57% · 10 µF (3), 150 pF (2), 22 pF (1)
Pin 8Connected to: 12V 100%
  • Decoupling capacitor on 57% · 100 nF (4), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP Catamaran.kicad PreRoute20220115 pcb by freeDSP, FreeDSP Classic SMD AB plus-II by CyberPit, FreeDSP-FreeDSP SMD AB by CyberPit and Exits-1U by benregnier.

The LME49720 in open source designs

The gallery holds 9 open source boards using the LME49720 from 7 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 118 components.

100% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is FreeDSP Catamaran.kicad PreRoute20220115 pcb by freeDSP.

Microcontrollers on boards using the LME49720

What boards using the LME49720 are built for

LME49720: common questions

Where can I find a LME49720 reference design?

Each of the 9 boards on this page is a real design using the LME49720. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LME49720 - pin?

The - pins have a series resistor on 7 of 7 designs, most often 1 kΩ (then 100 kΩ). Counted from the KiCad layouts of 7 open source designs using the LME49720.

What resistor goes on the LME49720 pin 1?

Pin 1 has a series resistor on 6 of 7 designs, most often 100 kΩ (then 22 kΩ). Counted from the KiCad layouts of 7 open source designs using the LME49720.

What resistor goes on the LME49720 pin 7?

Pin 7 has a series resistor on 6 of 7 designs, most often 100 kΩ (then 22 kΩ). Counted from the KiCad layouts of 7 open source designs using the LME49720.

What parts are used alongside the LME49720?

The 24AA256, ADAU1701, AZ1117-ADJ, NJM4556AV-TE1 and SN74LV541APWR appear in the most repositories here.

Which microcontrollers do boards using the LME49720 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the LME49720?

The median is 100 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the LME49720?

By GitHub stars, FreeDSP Catamaran.kicad PreRoute20220115 pcb by freeDSP, with 11 stars.

Can I simulate one of these boards using the LME49720 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part