Wild tamagotchi
ri-buni·Wild-tamagotchi·PCB/inzhugotchi.kicad_pcb
About the Wild tamagotchi PCB
Wild tamagotchi is an open source ESP32 PCB design by ri-buni, published on GitHub. It is a 2-layer board measuring 61.5 × 69 mm, with 9 components from 7 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. By type, the board carries 4 connectors, 4 switches and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
cute tamagotchi of bunny
Made with Claude Code, but the character itself and drawinng were made by me.
Main components on the Wild tamagotchi
Wild tamagotchi bill of materials (BOM)
9 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC-1-N8R2 | XCVR_ESP32-S3-DEVKITC-1-N8R2 | U1 |
| 1 | battery | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | OUT+/B+ | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | OUT-/B- | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | display | PinSocket_1x04_P2.54mm_Vertical | J4 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | ON/OFF | SW_PUSH_6mm | SW4 |
Wild tamagotchi design files
The KiCad project lives in the ri-buni/Wild-tamagotchi repository on GitHub; these links point at the commit this page was built from.
Wild tamagotchi: common questions
What microcontroller does the Wild tamagotchi use?
The Wild tamagotchi is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.
How big is the Wild tamagotchi PCB?
The Wild tamagotchi measures 61.5 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wild tamagotchi?
9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wild tamagotchi design files?
From the ri-buni/Wild-tamagotchi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wild tamagotchi design in my own project?
The repository has no license, so all rights stay with ri-buni. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Wild tamagotchi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k