Unipad

ricardoquesada·unipad·hardware/unipad_c64/unipad_c64.kicad_pcb

Unipad PCB layout, top view — open source Raspberry Pi board by ricardoquesada

About the Unipad PCB

Unipad is an open source Raspberry Pi PCB design by ricardoquesada, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 62.5 × 60 mm, with 44 components from 22 distinct parts.

Its main chip is the SC1633, from the Raspberry Pi family. Other key parts include the EM74HCT05D. By type, the board carries 16 resistors, 11 capacitors, 4 ICs, 4 diodes, 3 connectors and 3 switches.

It belongs with the retro computing and iot & wireless designs in this gallery.

From the project

Unipad C64 is a low-power (< 45 mA), CIA/SID-protected wireless Bluetooth adapter for the Commodore 64 and Commodore 128, supporting modern Bluetooth Gamepads, Commodore 1351 Analog Mice, Commodore 1311/1312 Paddles, and Rumble.

Unipad C64 is a low-power (< 45 mA), CIA/SID-protected wireless Bluetooth adapter for the Commodore 64 and Commodore 128, supporting modern Bluetooth Gamepads, Commodore 1351 Analog Mice, Commodore 1311/1312 Paddles, and Rumble.

Schematic and 4-layer PCB layout files are in KiCad 10 format in this folder (F.Cu, In1.Cu GND, In2.Cu Power, B.Cu). Shared custom footprints resolve from ../libs/Unipad.pretty/. Turnkey JLCPCB 4-layer Gerbers, Excellon drill files, BOM, and Pick-and-Place CPL are located in gerberjlcpcbreva/. Hardware Board ID (BOARDID[2:0] = 0b111): Three zero-BOM open copper…

Main components on the Unipad

SC1633EM74HCT05D

Unipad bill of materials (BOM)

44 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SC1633
Raspberry_Pi_Pico_2_W
Raspberry Pi
U1
3
EM74HCT05D
74HCT05
EnergyMath
U4, U5, U6
1
DMG2305UX-13
DMG2305UX
Diodes Incorporated
Q1
1
PORT JOY #1
J2
1
PORT JOY #2
J3
1
DEBUG_LA_HDR
J4
1
0805L025/36XR
250mA_PTC
LUTE
F1
1
PTS645VH39-2 LFS
RESET
C&K
SW1
1
PTS645VH39-2 LFS
MODE
C&K
SW3
1
PTS645VH39-2 LFS
SWAP
C&K
SW4
1
KT-0805G
PWR
Hubei KENTO Elec
D1
1
NCD0805B2
BLUE
Foshan NationStar Optoelectronics
D4
1
KT-0805G
GREEN
Hubei KENTO Elec
D5
1
NCD0805R1
RED
Foshan NationStar Optoelectronics
D6
1
GZ2012D601TF
600R@100MHz
Sunlord
FB1
7
CC0805KRX7R9BB104
.1uF
YAGEO
C1, C4, C8, C10, C11, C12, C13
3
CL21A106KAYNNNE
10uF
Samsung Electro-Mechanics
C5, C6, C9
1
GRM21BR61A476ME15L
47uF
Murata Electronics
C7
9
0805W8F1002T5E
10K
UNI-ROYAL
R1, R10, R11, R13, R14, R16, R17, R19 +1
4
0805W8F3301T5E
3K3
UNI-ROYAL
R2, R7, R8, R9
Show 2 more
QtyPartRefs
1
0805W8F1003T5E
100K
UNI-ROYAL
R3
2
0805W8F2202T5E
22K
UNI-ROYAL
R20, R23

Unipad design files

The KiCad project lives in the ricardoquesada/unipad repository on GitHub; these links point at the commit this page was built from.

Unipad: common questions

What microcontroller does the Unipad use?

The Unipad is built around the SC1633, from the Raspberry Pi family.

How big is the Unipad PCB?

The Unipad measures 62.5 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Unipad?

44 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Unipad design files?

From the ricardoquesada/unipad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Unipad design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Unipad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards