Control Decoder Simulator
rick0x00·8bit-computer·HARDWARE/EDA/KiCad/8-bit computer/Control Decoder Simulator.kicad_pcb
About the Control Decoder Simulator PCB
Control Decoder Simulator is an open source PCB design by rick0x00, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 60 × 50 mm, with 25 components from 8 distinct parts.
By type, the board carries 18 resistors, 4 connectors and 3 switches.
From the project
Open Source Electronic 8bit Computer
This project intends to develop and distribute following the principles of the Open Source Initiative(OSI).
The project was based on the model presented by Wagner Rambo and also by the project presented by Ben Eater, both on youtube!

Control Decoder Simulator bill of materials (BOM)
25 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONTROL_DECODER_1 | PinSocket_1x09_P2.00mm_Vertical | J94 |
| 1 | CONTROL_DECODER_2 | PinSocket_1x09_P2.00mm_Vertical | J95 |
| 1 | CONTROL_DECODER_3 | PinSocket_1x03_P2.00mm_Vertical | J96 |
| 1 | POWER | PinSocket_1x03_P2.00mm_Vertical | J97 |
| 1 | CON.WOR.1 | SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW12 |
| 1 | CON.WOR.2 | SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW13 |
| 1 | CON.WOR.3 | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW14 |
| 18 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R113, R114, R115, R116, R117, R118, R119, R120 +10 |
Control Decoder Simulator design files
The KiCad project lives in the rick0x00/8bit-computer repository on GitHub; these links point at the commit this page was built from.
Control Decoder Simulator: common questions
How big is the Control Decoder Simulator PCB?
The Control Decoder Simulator measures 60 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Control Decoder Simulator?
25 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Control Decoder Simulator design files?
From the rick0x00/8bit-computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Control Decoder Simulator design in my own project?
Yes, under the terms of its Apache-2.0 license, which rick0x00 chose for the repository.
More boards in 8bit-computer
8 Bit Computer
rick0x00
50 × 100 mm449 parts2LApache-2.00Control Word
rick0x00
100 × 50 mm46 parts2LApache-2.00ALU
rick0x00
100 × 50 mm34 parts2LApache-2.00RAM
rick0x00
100 × 50 mm33 parts2LApache-2.00MAR
rick0x00
50 × 100 mm27 parts2LApache-2.00B register
rick0x00
100 × 50 mm26 parts2LApache-2.00Instruction Register
rick0x00
75 × 50 mm26 parts2LApache-2.00Accumulator Register
rick0x00
100 × 50 mm26 parts2LApache-2.00Logic Unit
rick0x00
100 × 50 mm23 parts2LApache-2.00Selection Circuit
rick0x00
50 × 75 mm19 parts2LApache-2.00Display
rick0x00
100 × 50 mm19 parts2LApache-2.00