Logic Unit
rick0x00·8bit-computer·HARDWARE/EDA/KiCad/8-bit computer/Logic Unit.kicad_pcb
About the Logic Unit PCB
Logic Unit is an open source PCB design by rick0x00, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 100 × 50 mm, with 23 components from 11 distinct parts.
Other key parts include the 74LS08, 74LS32 and 74LS86. By type, the board carries 8 ICs, 8 capacitors and 7 connectors.
From the project
Open Source Electronic 8bit Computer
This project intends to develop and distribute following the principles of the Open Source Initiative(OSI).
The project was based on the model presented by Wagner Rambo and also by the project presented by Ben Eater, both on youtube!

Main components on the Logic Unit
Logic Unit bill of materials (BOM)
23 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS08 | DIP-14_W7.62mm_LongPads | U34, U35 |
| 4 | 74LS32 | DIP-14_W7.62mm_LongPads | U36, U37, U40, U41 |
| 2 | 74LS86 | DIP-14_W7.62mm_LongPads | U38, U39 |
| 1 | CONTROL | PinSocket_1x02_P2.00mm_Vertical | J43 |
| 1 | POWER | PinSocket_1x03_P2.00mm_Vertical | J44 |
| 1 | AND_B[7...0] | PinSocket_1x09_P2.00mm_Vertical | J45 |
| 1 | OR_B[7...0] | PinSocket_1x09_P2.00mm_Vertical | J46 |
| 1 | XOR_NOT_B[7...0] | PinSocket_1x09_P2.00mm_Vertical | J47 |
| 1 | B_REG_B[7...0] | PinSocket_1x09_P2.00mm_Vertical | J48 |
| 1 | ACC_B[7...0] | PinSocket_1x09_P2.00mm_Vertical | J49 |
| 8 | 100nF 63V | C_Rect_L7.0mm_W2.5mm_P5.00mm | C36, C37, C38, C39, C40, C41, C42, C43 |
Logic Unit design files
The KiCad project lives in the rick0x00/8bit-computer repository on GitHub; these links point at the commit this page was built from.
Logic Unit: common questions
How big is the Logic Unit PCB?
The Logic Unit measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Logic Unit?
23 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Logic Unit design files?
From the rick0x00/8bit-computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Logic Unit design in my own project?
Yes, under the terms of its Apache-2.0 license, which rick0x00 chose for the repository.
More boards in 8bit-computer
8 Bit Computer
rick0x00
50 × 100 mm449 parts2LApache-2.00Control Word
rick0x00
100 × 50 mm46 parts2LApache-2.00ALU
rick0x00
100 × 50 mm34 parts2LApache-2.00RAM
rick0x00
100 × 50 mm33 parts2LApache-2.00MAR
rick0x00
50 × 100 mm27 parts2LApache-2.00Accumulator Register
rick0x00
100 × 50 mm26 parts2LApache-2.00Instruction Register
rick0x00
75 × 50 mm26 parts2LApache-2.00B register
rick0x00
100 × 50 mm26 parts2LApache-2.00Control Decoder Simulator
rick0x00
60 × 50 mm25 parts2LApache-2.00Selection Circuit
rick0x00
50 × 75 mm19 parts2LApache-2.00Display
rick0x00
100 × 50 mm19 parts2LApache-2.00