Instruction Register
rick0x00·8bit-computer·HARDWARE/EDA/KiCad/8-bit computer/Instruction Register.kicad_pcb
About the Instruction Register PCB
Instruction Register is an open source PCB design by rick0x00, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 75 × 50 mm, with 26 components from 16 distinct parts.
Other key parts include the 74LS173 and 74LS245. By type, the board carries 8 diodes, 8 resistors, 4 connectors, 3 ICs and 3 capacitors.
From the project
Open Source Electronic 8bit Computer
This project intends to develop and distribute following the principles of the Open Source Initiative(OSI).
The project was based on the model presented by Wagner Rambo and also by the project presented by Ben Eater, both on youtube!

Main components on the Instruction Register
Instruction Register bill of materials (BOM)
26 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS173 | DIP-16_W7.62mm_LongPads | U19, U20 |
| 1 | 74LS245 | DIP-20_W7.62mm_LongPads | U21 |
| 1 | POWER | PinSocket_1x03_P2.00mm_Vertical | J21 |
| 1 | CONTROL | PinSocket_1x05_P2.00mm_Vertical | J22 |
| 1 | I_REG_B[7...0] | PinSocket_1x09_P2.00mm_Vertical | J23 |
| 1 | BUS[7...0] | PinSocket_1x09_P2.00mm_Vertical | J24 |
| 1 | i_reg_b7 | LED_D3.0mm | D19 |
| 1 | i_reg_b6 | LED_D3.0mm | D20 |
| 1 | i_reg_b5 | LED_D3.0mm | D21 |
| 1 | i_reg_b4 | LED_D3.0mm | D22 |
| 1 | i_reg_b3 | LED_D3.0mm | D23 |
| 1 | i_reg_b2 | LED_D3.0mm | D24 |
| 1 | i_reg_b1 | LED_D3.0mm | D25 |
| 1 | i_reg_b0 | LED_D3.0mm | D26 |
| 3 | 100nF 63V | C_Rect_L7.0mm_W2.5mm_P5.00mm | C21, C22, C23 |
| 8 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R27, R28, R29, R30, R31, R32, R33, R34 |
Instruction Register design files
The KiCad project lives in the rick0x00/8bit-computer repository on GitHub; these links point at the commit this page was built from.
Instruction Register: common questions
How big is the Instruction Register PCB?
The Instruction Register measures 75 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Instruction Register?
26 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Instruction Register design files?
From the rick0x00/8bit-computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Instruction Register design in my own project?
Yes, under the terms of its Apache-2.0 license, which rick0x00 chose for the repository.
More boards in 8bit-computer
8 Bit Computer
rick0x00
50 × 100 mm449 parts2LApache-2.00Control Word
rick0x00
100 × 50 mm46 parts2LApache-2.00ALU
rick0x00
100 × 50 mm34 parts2LApache-2.00RAM
rick0x00
100 × 50 mm33 parts2LApache-2.00MAR
rick0x00
50 × 100 mm27 parts2LApache-2.00B register
rick0x00
100 × 50 mm26 parts2LApache-2.00Accumulator Register
rick0x00
100 × 50 mm26 parts2LApache-2.00Control Decoder Simulator
rick0x00
60 × 50 mm25 parts2LApache-2.00Logic Unit
rick0x00
100 × 50 mm23 parts2LApache-2.00Selection Circuit
rick0x00
50 × 75 mm19 parts2LApache-2.00Display
rick0x00
100 × 50 mm19 parts2LApache-2.00