Selection Circuit
rick0x00·8bit-computer·HARDWARE/EDA/KiCad/8-bit computer/Selection Circuit.kicad_pcb
About the Selection Circuit PCB
Selection Circuit is an open source PCB design by rick0x00, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 50 × 75 mm, with 19 components from 13 distinct parts.
Other key parts include the 74LS00 and 74LS157. By type, the board carries 5 connectors, 5 capacitors, 4 ICs, 3 resistors and 2 switches.
From the project
Open Source Electronic 8bit Computer
This project intends to develop and distribute following the principles of the Open Source Initiative(OSI).
The project was based on the model presented by Wagner Rambo and also by the project presented by Ben Eater, both on youtube!

Main components on the Selection Circuit
Selection Circuit bill of materials (BOM)
19 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS00 | DIP-14_W7.62mm_LongPads | U15 |
| 3 | 74LS157 | DIP-16_W7.62mm_LongPads | U16, U17, U18 |
| 1 | BUS[7...0] | PinSocket_1x09_P2.00mm_Vertical | J17 |
| 1 | RAM_IN[7...0] | PinSocket_1x09_P2.00mm_Vertical | J18 |
| 1 | POWER | PinSocket_1x03_P2.00mm_Vertical | J19 |
| 1 | CONTROL | PinSocket_1x07_P2.00mm_Vertical | J20 |
| 1 | DATA[7...0] | PinSocket_1x09_P2.00mm_Vertical | J88 |
| 1 | WR | SW_PUSH_6mm_H5mm | SW5 |
| 1 | DAT[7...0] | SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW6 |
| 4 | 100nF 63V | C_Rect_L7.0mm_W2.5mm_P5.00mm | C16, C17, C18, C19 |
| 1 | 1nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C20 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24, R26 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25 |
Selection Circuit design files
The KiCad project lives in the rick0x00/8bit-computer repository on GitHub; these links point at the commit this page was built from.
Selection Circuit: common questions
How big is the Selection Circuit PCB?
The Selection Circuit measures 50 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Selection Circuit?
19 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Selection Circuit design files?
From the rick0x00/8bit-computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Selection Circuit design in my own project?
Yes, under the terms of its Apache-2.0 license, which rick0x00 chose for the repository.
More boards in 8bit-computer
8 Bit Computer
rick0x00
50 × 100 mm449 parts2LApache-2.00Control Word
rick0x00
100 × 50 mm46 parts2LApache-2.00ALU
rick0x00
100 × 50 mm34 parts2LApache-2.00RAM
rick0x00
100 × 50 mm33 parts2LApache-2.00MAR
rick0x00
50 × 100 mm27 parts2LApache-2.00B register
rick0x00
100 × 50 mm26 parts2LApache-2.00Instruction Register
rick0x00
75 × 50 mm26 parts2LApache-2.00Accumulator Register
rick0x00
100 × 50 mm26 parts2LApache-2.00Control Decoder Simulator
rick0x00
60 × 50 mm25 parts2LApache-2.00Logic Unit
rick0x00
100 × 50 mm23 parts2LApache-2.00Display
rick0x00
100 × 50 mm19 parts2LApache-2.00