Display
rick0x00·8bit-computer·HARDWARE/EDA/KiCad/8-bit computer/Display.kicad_pcb
About the Display PCB
Display is an open source PCB design by rick0x00, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 100 × 50 mm, with 19 components from 16 distinct parts.
Other key parts include the NE555, 28C16A, 74LS161, CC56-12SURKWA and 74LS139. By type, the board carries 6 capacitors, 5 ICs, 5 connectors, 2 resistors and 1 switch.
It belongs with the displays & leds designs in this gallery.
From the project
Open Source Electronic 8bit Computer
This project intends to develop and distribute following the principles of the Open Source Initiative(OSI).
The project was based on the model presented by Wagner Rambo and also by the project presented by Ben Eater, both on youtube!

Main components on the Display
Display bill of materials (BOM)
19 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555 | DIP-8_W7.62mm_LongPads | U47 |
| 1 | 28C16A | DIP-24_W15.24mm_LongPads | U48 |
| 1 | 74LS161 | DIP-16_W7.62mm_LongPads | U49 |
| 1 | CC56-12SURKWA | CA56-12SURKWA | U50 |
| 1 | 74LS139 | DIP-16_W7.62mm_LongPads | U51 |
| 1 | OUT_B[7...0] | PinSocket_1x09_P2.00mm_Vertical | J58 |
| 1 | CONTROL | PinSocket_1x03_P2.00mm_Vertical | J59 |
| 1 | POWER | PinSocket_1x03_P2.00mm_Vertical | J60 |
| 1 | DISPLAY | PinSocket_1x09_P2.00mm_Vertical | J89 |
| 1 | DISPLAY | PinSocket_1x05_P2.00mm_Vertical | J90 |
| 1 | Sig./Uns. | SW_CuK_OS102011MA1QN1_SPDT_Angled | SW7 |
| 1 | 10nF 50V | C_Disc_D4.3mm_W1.9mm_P5.00mm | C49 |
| 1 | 15nF 63V | C_Rect_L7.0mm_W2.5mm_P5.00mm | C50 |
| 4 | 100nF 63V | C_Rect_L7.0mm_W2.5mm_P5.00mm | C51, C52, C53, C54 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R67 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R68 |
Display design files
The KiCad project lives in the rick0x00/8bit-computer repository on GitHub; these links point at the commit this page was built from.
Display: common questions
How big is the Display PCB?
The Display measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Display?
19 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Display design files?
From the rick0x00/8bit-computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Display design in my own project?
Yes, under the terms of its Apache-2.0 license, which rick0x00 chose for the repository.
More boards in 8bit-computer
8 Bit Computer
rick0x00
50 × 100 mm449 parts2LApache-2.00Control Word
rick0x00
100 × 50 mm46 parts2LApache-2.00ALU
rick0x00
100 × 50 mm34 parts2LApache-2.00RAM
rick0x00
100 × 50 mm33 parts2LApache-2.00MAR
rick0x00
50 × 100 mm27 parts2LApache-2.00Accumulator Register
rick0x00
100 × 50 mm26 parts2LApache-2.00Instruction Register
rick0x00
75 × 50 mm26 parts2LApache-2.00B register
rick0x00
100 × 50 mm26 parts2LApache-2.00Control Decoder Simulator
rick0x00
60 × 50 mm25 parts2LApache-2.00Logic Unit
rick0x00
100 × 50 mm23 parts2LApache-2.00Selection Circuit
rick0x00
50 × 75 mm19 parts2LApache-2.00
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k