HardLabs

RICM Greenpower Telemetry Module

ricomputermuseum·RICM_greenpower_telemetry·RICM Greenpower Telemetry Module/RICM Greenpower Telemetry Module.kicad_pcb

RICM Greenpower Telemetry Module layout, top view — open source RP2040/RP2350 board by ricomputermuseum

About the RICM Greenpower Telemetry Module

RICM Greenpower Telemetry Module is an open source RP2040/RP2350 PCB design by ricomputermuseum, published on GitHub. It is a 2-layer board measuring 80 × 95 mm, with 57 components from 23 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the XL2001E1, MT92165, Adafruit_MicroSD_SPI_SDIO, ADS7830 and MPU_6050_module. By type, the board carries 28 resistors, 11 connectors, 9 capacitors, 6 ICs, 2 inductors and 1 diode.

From the project

A Raspberry Pi Pico (or Pico W) based telemetry system

Main components on the RICM Greenpower Telemetry Module

XL2001E1MT92165PicoAdafruit_MicroSD_SPI_SDIOADS7830MPU_6050_module

RICM Greenpower Telemetry Module bill of materials (BOM)

57 components, 23 distinct parts.

QtyPartRefs
1
XL2001E1
U1
1
MT92165
U2
1
Pico
U3
1
Adafruit_MicroSD_SPI_SDIO
U4
1
ADS7830
U5
1
MPU_6050_module
U6
1
Jack-DC
J0
2
Conn_01x04_Female
J1, J9
1
Conn_01x02_Female
J2
4
Conn_01x02_Female
J3, J4, J5, J6
2
Conn_01x03_Female
J7, J8
1
Conn_01x05_Female
J10
1
D_Schottky
D1
2
47uh
L1, L2
6
10uf
C1, C3, C4, C5, C6, C9
1
47uf
C2
1
100uf
C7
1
0.1uf
C8
4
4.7k
R1, R2, R14, R16
21
10k
R3, R4, R5, R6, R8, R9, R10, R11 +13
Show 3 more
QtyPartRefs
1
47k
R7
1
30k
R24
1
68k
R26

RICM Greenpower Telemetry Module design files

The KiCad project lives in the ricomputermuseum/RICM_greenpower_telemetry repository on GitHub; these links point at the commit this page was built from.

RICM Greenpower Telemetry Module: common questions

What microcontroller does the RICM Greenpower Telemetry Module use?

The RICM Greenpower Telemetry Module is built around the Pico, from the RP2040/RP2350 family.

How big is the RICM Greenpower Telemetry Module?

The RICM Greenpower Telemetry Module measures 80 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RICM Greenpower Telemetry Module?

57 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the RICM Greenpower Telemetry Module design files?

From the ricomputermuseum/RICM_greenpower_telemetry repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RICM Greenpower Telemetry Module design in my own project?

The repository has no license, so all rights stay with ricomputermuseum. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RICM Greenpower Telemetry Module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in RICM_greenpower_telemetry

Similar boards