8 open source boards using the ADS7830
Real designs built with the ADS7830, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
ADCS
onionharvester
90.2 × 95.9 mm184 parts4LNo license50RP2040/RP2350
ADCS
stanford-ssi
90.2 × 95.9 mm187 parts4LNo license13RP2040/RP2350
RICM Greenpower Telemetry Module
ricomputermuseum
80 × 95 mm57 parts2LNo license2RP2040/RP2350
ADCS board
pete4radio
90.2 × 95.9 mm182 parts4LNo license0MCR prototype
alanswx
267.1 × 198.7 mm141 parts4LNo license0Gamepad
vsfteam
155.8 × 76.2 mm100 parts2LApache-2.0340Corridor distribution
lucanastasio
60 × 100 mm81 parts2LNo license1FX-Pots
jvegaf
100 × 100 mm33 parts2LNo license0
How designs wire the ADS7830
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ADS7830 connects to, and the resistors, capacitors and other passives placed on it.
- The REFIN/REFOUT pin has a capacitor to GND on 8 of 8 designs, most often 100 nF (then 1 µF).
- The SCL pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ (then 4.7 kΩ).
- The SDA pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ (then 4.7 kΩ).
- The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CH0pin 1 | Connected to: A connector 63% |
|
| GNDpin 9 | Connected to: GND 100% | — |
| REFIN/REFOUTpin 10 | Connected to: Signal 63% · VREF 38% |
|
| COMpin 11 | Connected to: GND 88% | — |
| A0pin 12 | Connected to: GND 63% · a signal 38% | — |
| A1pin 13 | Connected to: GND 63% · a signal 38% | — |
| SCLpin 14 | Connected to: A connector 38%, ADM1176-1ARMZ-R7 38%, the microcontroller 38% |
|
| SDApin 15 | Connected to: A connector 38%, ADM1176-1ARMZ-R7 38%, the microcontroller 38% |
|
| VDDpin 16 | Connected to: 3.3V 75% · a signal 25% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gamepad by vsfteam, ADCS by onionharvester, ADCS by stanford-ssi and RICM Greenpower Telemetry Module by ricomputermuseum.
The ADS7830 in open source designs
The gallery holds 8 open source boards using the ADS7830 from 8 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 121 components.
50% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is Gamepad by vsfteam.
Parts used alongside the ADS7830
Microcontrollers on boards using the ADS7830
What boards using the ADS7830 are built for
ADS7830: common questions
Where can I find a ADS7830 reference design?
Each of the 8 boards on this page is a real design using the ADS7830. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ADS7830 REFIN/REFOUT pin connected?
The REFIN/REFOUT pin has a capacitor to GND on 8 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the ADS7830.
What pull-up resistor is used on the ADS7830 SCL pin?
The SCL pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 8 open source designs using the ADS7830.
What pull-up resistor is used on the ADS7830 SDA pin?
The SDA pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 8 open source designs using the ADS7830.
What parts are used alongside the ADS7830?
The ADM1176-1ARMZ-R7, BMI270, EP2W+, Orion B16 and RM3100CB appear in the most repositories here.
Which microcontrollers do boards using the ADS7830 use?
Most are built on RP2040/RP2350 (4).
How big is a typical board using the ADS7830?
The median is 90.2 × 95.9 mm, and 50% are two-layer designs.
What is the most popular open source board using the ADS7830?
By GitHub stars, Gamepad by vsfteam, with 340 stars.
Can I simulate one of these boards using the ADS7830 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.