Large board

ril3y·makermatrix_hardware

Large board layout, top view — open source STM32 board by ril3y

About the Large board

Large board is an open source STM32 PCB design by ril3y, published on GitHub. It is a 2-layer board measuring 20 × 20 mm, with 42 components from 12 distinct parts.

Its main chip is the STM32F030F4Px, from the STM32 family. Other key parts include the SK6812MINI-E_C5149201, SN74HC165PW(LX) and CC6207MST. By type, the board carries 18 ICs, 14 capacitors, 7 resistors, 2 connectors and 1 switch.

It belongs with the sensors designs in this gallery.

From the project

Hardware design files for MakerMatrix project

Files: - makermatrix.kicadsch - Main schematic - makermatrix.kicadpcb - PCB layout - hallinputs.kicadsch - Hall sensor input circuitry - schmaticreel.pdf - Schematic PDF export - pcbreel.pdf - PCB layout PDF export

Main components on the Large board

STM32F030F4PxSK6812MINI-E_C5149201SN74HC165PW(LX)CC6207MST

Large board bill of materials (BOM)

42 components, 12 distinct parts.

QtyPartRefs
1
STM32F030F4Px
U1
8
SK6812MINI-E_C5149201
U2, U3, U4, U5, U6, U7, U10, U12
1
SN74HC165PW(LX)
U11
8
CC6207MST
U15, U16, U17, U18, U19, U20, U21, U22
1
OUTPUTS
J2
1
INPUTS
J3
1
PS-6824DVB-6PN
SW1
14
.1uf
C2, C3, C5, C6, C7, C8, C9, C10 +6
4
10k
R1, R3, R5, R6
1
4.7k
R2
1
220
R4
1
YC158TJR-0710KL
RN2

Large board design files

The KiCad project lives in the ril3y/makermatrix_hardware repository on GitHub; these links point at the commit this page was built from.

Large board: common questions

What microcontroller does the Large board use?

The Large board is built around the STM32F030F4Px, from the STM32 family.

How big is the Large board?

The Large board measures 20 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Large board?

42 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Large board design files?

From the ril3y/makermatrix_hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Large board design in my own project?

The repository has no license, so all rights stay with ril3y. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Large board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in makermatrix_hardware

Similar boards