Maker flip flop
ril3y·makermatrix_hardware·matrix-sr-design/maker-flip-flop/maker-flip-flop.kicad_pcb
About the Maker flip flop PCB
Maker flip flop is an open source PCB design by ril3y, published on GitHub. It is a 2-layer board measuring 228.6 × 29.4 mm, with 45 components from 12 distinct parts.
Other key parts include the SK6812MINI-E_C5149201 and SN74HC165DR(LX). By type, the board carries 19 capacitors, 9 ICs, 8 switches, 4 connectors and 1 resistor.
It belongs with the sensors designs in this gallery.
From the project
Hardware design files for MakerMatrix project
Files: - makermatrix.kicadsch - Main schematic - makermatrix.kicadpcb - PCB layout - hallinputs.kicadsch - Hall sensor input circuitry - schmaticreel.pdf - Schematic PDF export - pcbreel.pdf - PCB layout PDF export
Main components on the Maker flip flop
Maker flip flop bill of materials (BOM)
45 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | SK6812MINI-E_C5149201 | LED-SMD_L3.2-W2.8-TR-reversed | U1, U2, U3, U4, U5, U6, U7, U8 |
| 1 | SN74HC165DR(LX) | SOP-16_L10.0-W3.9-P1.27-LS6.0-BL | U10 |
| 2 | OUT | HDR-TH_12P-P1.27_XKB_X1321FR-2X06-C43D24 | J1, J4 |
| 1 | OUT | HDR-TH_12P-P1.27-H-M-R2-C6-S1.27-W7.5 | J2 |
| 1 | TL_OUT | HDR-TH_12P-P1.27-H-M-R2-C6-S1.27-W7.5 | J5 |
| 1 | X1321WR-2X06J-C40D18 | HDR-TH_12P-P1.27-H-M-R2-C6-S1.27-W7.5 | H1 |
| 1 | TL_IN | HDR-TH_12P-P1.27-H-M-R2-C6-S1.27-W7.5 | IN1 |
| 2 | X1321WR-2X06J-C40D18 | HDR-TH_12P-P1.27-H-M-R2-C6-S1.27-W7.5 | IN6, R_IN1 |
| 8 | DM1-135P-1-16 | SW-TH_DM1-135P-1-16 | SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 18 | .1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C7, C8, C9 +10 |
| 1 | 1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | YC158TJR-0710KL | RES-ARRAY-SMD_1206-L3.2-W1.6-P0.64 | RN1 |
Maker flip flop design files
The KiCad project lives in the ril3y/makermatrix_hardware repository on GitHub; these links point at the commit this page was built from.
Maker flip flop: common questions
How big is the Maker flip flop PCB?
The Maker flip flop measures 228.6 × 29.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Maker flip flop?
45 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Maker flip flop design files?
From the ril3y/makermatrix_hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Maker flip flop design in my own project?
The repository has no license, so all rights stay with ril3y. Use it as a reference, and ask the author before reusing the design.
More boards in makermatrix_hardware
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956