Out
ril3y·makermatrix_hardware·matrix-sr-design/maker-flip-flop/production/out.kicad_pcb
About the Out PCB
Out is an open source PCB design by ril3y, published on GitHub. It is a 2-layer board measuring 228.6 × 147 mm, with 40 components from 9 distinct parts.
Other key parts include the SK6812MINI-E_C5149201 and SN74HC165DR(LX). By type, the board carries 19 capacitors, 9 ICs, 8 switches, 1 connector and 1 resistor.
It belongs with the sensors designs in this gallery.
From the project
Hardware design files for MakerMatrix project
Files: - makermatrix.kicadsch - Main schematic - makermatrix.kicadpcb - PCB layout - hallinputs.kicadsch - Hall sensor input circuitry - schmaticreel.pdf - Schematic PDF export - pcbreel.pdf - PCB layout PDF export
Main components on the Out
Out bill of materials (BOM)
40 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SK6812MINI-E_C5149201 | LED-SMD_L3.2-W2.8-TR-reversed | U1 |
| 7 | SK6812MINI-E_C5149201 | LED-SMD_L3.2-W2.8-TR | U2, U3, U4, U5, U6, U7, U8 |
| 1 | SN74HC165DR(LX) | SOP-16_L10.0-W3.9-P1.27-LS6.0-BL | U10 |
| 1 | OUT | HDR-TH_12P-P1.27_XKB_X1321FR-2X06-C43D24 | J1 |
| 2 | X1321WR-2X06J-C40D18 | HDR-TH_12P-P1.27-H-M-R2-C6-S1.27-W7.5 | H5, H6 |
| 8 | DM1-135P-1-16 | SW-TH_DM1-135P-1-16 | SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 18 | .1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C7, C8, C9 +10 |
| 1 | 1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | YC158TJR-0710KL | RES-ARRAY-SMD_1206-L3.2-W1.6-P0.64 | RN1 |
Out design files
The KiCad project lives in the ril3y/makermatrix_hardware repository on GitHub; these links point at the commit this page was built from.
Out: common questions
How big is the Out PCB?
The Out measures 228.6 × 147 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Out?
40 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Out design files?
From the ril3y/makermatrix_hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Out design in my own project?
The repository has no license, so all rights stay with ril3y. Use it as a reference, and ask the author before reusing the design.
More boards in makermatrix_hardware
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956