Hackpad

rishabhreng·hackpad·pcb/hackpad.kicad_pcb

Hackpad PCB layout, top view — open source RP2040/RP2350 board by rishabhreng

About the Hackpad PCB

Hackpad is an open source RP2040/RP2350 PCB design by rishabhreng, published on GitHub. It is a 2-layer board measuring 63.1 × 75.2 mm, with 16 components from 6 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 7 switches, 7 diodes, 1 IC and 1 connector.

It belongs with the displays & leds and keyboards designs in this gallery.

From the project

A 6-key macropad, in an "A" shape, with a 0.91" OLED display and a rotary encoder. It also has one LED under the central key, and everything is controlled with KMK firmware.

A 6-key macropad, in an "A" shape, with a 0.91" OLED display and a rotary encoder. It also has one LED under the central key, and everything is controlled with KMK firmware.

This was my first time designing a macropad or any other electronics with KiCad, and I really enjoyed it (esp. learning more about the wiring). Fortunately, I have some experience with CAD in Onshape, so modeling the case went smoothly.

Hackpad, from the project README
From the project README

Main components on the Hackpad

Hackpad bill of materials (BOM)

16 components, 6 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
OLED DISPLAY
J1
1
RotaryEncoder_Switch
SW1
6
SW_Push
SW2, SW3, SW4, SW5, SW6, SW7
1
SK6812MINI
D1
6
D
D2, D3, D4, D5, D6, D7

Hackpad design files

The KiCad project lives in the rishabhreng/hackpad repository on GitHub; these links point at the commit this page was built from.

Hackpad: common questions

What microcontroller does the Hackpad use?

The Hackpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Hackpad PCB?

The Hackpad measures 63.1 × 75.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hackpad?

16 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hackpad design files?

From the rishabhreng/hackpad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hackpad design in my own project?

The repository has no license, so all rights stay with rishabhreng. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hackpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards