Mini bluetooth speaker

rishigovindnair-web·mini-bluetooth-speaker·hardware/kicad/bt-speaker.kicad_sch

Mini bluetooth speaker

About the Mini bluetooth speaker PCB

Mini bluetooth speaker is an open source PCB design by rishigovindnair-web, published on GitHub under the CC-BY-4.0 license. It is a board, with 5 components from 5 distinct parts.

Other key parts include the TP4056 USB-C module and MH-M38 BT amp. By type, the board carries 2 ICs, 1 connector, 1 battery holder and 1 speaker.

It belongs with the power & battery, audio and iot & wireless designs in this gallery.

From the project

A pocket Bluetooth speaker you can build for about $22 in parts: one 18650 cell, USB-C charging with battery protection, an MH-M38 Bluetooth amp, a 40 mm driver and a 3D-printed case with a power switch. Includes STEP + STL files, a parametric CadQuery script, a KiCad schematic, a BOM and a step-by-step build guide.

A portable Bluetooth speaker with case made from a 3D printer. Powered by a single 18650 cell. It can be charged via USB-C. Part cost = ~$22 (+ postage, roughly $27+ total).

- Case - 83x52x46mm. 2 pieces. Assembled with 4 M2 screws. - Speaker - 1x 40mm 4ohm speaker driver. Using an MH-M38 Bluetooth amp module. - Power - Samsung 25R 18650 cell. TP4056 USB-C charging module with protection. Slide switch on end wall.

Main components on the Mini bluetooth speaker

TP4056 USB-C moduleMH-M38 BT amp

Mini bluetooth speaker bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
TP4056 USB-C module
U1
1
MH-M38 BT amp
U2
1
USB-C 5 V supply
J1
1
18650 cell
BT1
1
40 mm driver
LS1

Mini bluetooth speaker design files

The KiCad project lives in the rishigovindnair-web/mini-bluetooth-speaker repository on GitHub; these links point at the commit this page was built from.

Mini bluetooth speaker: common questions

How many components are on the Mini bluetooth speaker?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mini bluetooth speaker design files?

From the rishigovindnair-web/mini-bluetooth-speaker repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Mini bluetooth speaker design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which rishigovindnair-web chose for the repository.

Similar boards