Lipo battery charger
rmingon·lipo-battery-charger·lipo-charger/lipo-charger.kicad_pcb
About the Lipo battery charger PCB
Lipo battery charger is an open source PCB design by rmingon, published on GitHub. It is a 2-layer board measuring 39.4 × 25.4 mm, with 18 components from 9 distinct parts.
Other key parts include the MCP73831-2-OT. By type, the board carries 5 resistors, 3 connectors, 2 test points, 2 capacitors, 1 IC and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
Lipo battery charger with different speed of charging

Main components on the Lipo battery charger
Lipo battery charger bill of materials (BOM)
18 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | Screw_Terminal_01x02 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 4 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | 50ma, 100ma, 200ma, 500ma |
| 2 | TestPoint | Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | TP1, TP2 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 2 | C_Small | C_0603_1608Metric | C1, C2 |
| 5 | R_Small | R_0603_1608Metric | R1, R2, R3, R4, R5 |
Lipo battery charger design files
The KiCad project lives in the rmingon/lipo-battery-charger repository on GitHub; these links point at the commit this page was built from.
Lipo battery charger: common questions
How big is the Lipo battery charger PCB?
The Lipo battery charger measures 39.4 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lipo battery charger?
18 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lipo battery charger design files?
From the rmingon/lipo-battery-charger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lipo battery charger design in my own project?
The repository has no license, so all rights stay with rmingon. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k