Fanny
rmskkn·fanny·hardware/kicad/fan_controller.kicad_pcb
About the Fanny PCB
Fanny is an open source PCB design by rmskkn, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 81 × 78 mm, with 97 components from 43 distinct parts.
By type, the board carries 42 resistors, 20 transistors, 11 connectors, 9 diodes, 9 capacitors and 5 fuses.
It belongs with the sensors designs in this gallery.
From the project
Versatile USB 4ch PWM fan controller
A USB-controlled carrier board for an STM32F103C8T6 "Blue Pill" module. It drives four 12 V PC fans and reads four analog sensors. The module shows up on the host as a USB CDC serial port (/dev/ttyACM or COMx).
- 4 independent fan channels. Each one switches between pwm (4-pin signal control) and dc (3-pin supply chopping) at runtime. - 4 analog inputs for NTC or voltage sensors plus 12 V rail sensing. All share one ADC scan with mV conversion. - Tach and stall detection on all 4 channels. 5 V tolerant. - Hardware failsafe by design. Every control line rests in its "fan on" state by default…

Fanny bill of materials (BOM)
97 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | Alpha & Omega AO3401A AO3401A | SOT-23 | Q1, Q4, Q7, Q10, Q14, Q16, Q18, Q20 |
| 8 | onsemi BSS138 BSS138 | SOT-23 | Q2, Q3, Q5, Q6, Q8, Q9, Q11, Q12 |
| 3 | BSS138 | SOT-23 | Q13, Q17, Q19 |
| 1 | MMBT3906 BSS138 | SOT-23 | Q15 |
| 1 | TE Connectivity 350424-1 12V IN | ConnHeader_MateNLok_1x04_P5.08mm_Vertical | J1 |
| 1 | BluePill A | PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | BluePill B | PinSocket_1x20_P2.54mm_Vertical | J3 |
| 1 | Molex 47053-1000 FAN1 | FanPinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Molex 47053-1000 FAN2 | FanPinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Molex 47053-1000 FAN3 | FanPinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Molex 47053-1000 FAN4 | FanPinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | FAN4 AIN2 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | AIN1 AIN3 | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | AIN2 AIN4 | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | AIN3 AIN1 | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | Bourns MF-MSMF250/16X-2 2.5A | Fuse_1812_4532Metric | F1 |
| 4 | Bourns MF-MSMF110/16-2 1.1A | Fuse_1812_4532Metric | F2, F3, F4, F5 |
| 1 | Littelfuse SMBJ13A SMBJ13A | D_SMB | D1 |
| 4 | SS34 | D_SMA | D2, D3, D4, D5 |
| 4 | Nexperia BAT54S,215 BAT54S | SOT-23 | D6, D8, D9, D10 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Murata BLM18AG601SN1D 600R@100MHz | L_0603_1608Metric | FB1 |
| 1 | 100u 25V | CP_Elec_6.3x7.7 | C1 |
| 1 | 10u 25V | C_1206_3216Metric | C2 |
| 1 | 1u | C_0603_1608Metric | C3 |
| 1 | 10N 100n | C_0603_1608Metric | C4 |
| 1 | 100N 10n | C_0603_1608Metric | C5 |
| 4 | 1n | C_0603_1608Metric | C6, C7, C8, C9 |
| 1 | 47K 47k | R_0603_1608Metric | R1 |
| 5 | 10K 10k | R_0603_1608Metric | R2, R33, R36, R39, R42 |
| 5 | 100 | R_0603_1608Metric | R3, R11, R15, R21, R23 |
| 2 | 100 2.2k | R_0603_1608Metric | R4, R16 |
| 3 | 100K 100 | R_0603_1608Metric | R5, R9, R17 |
| 3 | 10K 100k | R_0603_1608Metric | R6, R18, R24 |
| 3 | 10k | R_0603_1608Metric | R7, R19, R25 |
| 1 | 100 1k | R_0603_1608Metric | R8 |
| 2 | 10K 2.2k | R_0603_1608Metric | R10, R22 |
| 1 | 100 100k | R_0603_1608Metric | R12 |
| 1 | 100K 10k | R_0603_1608Metric | R13 |
| 5 | 10K 1k | R_0603_1608Metric | R14, R20, R26, R28, R30 |
| 2 | 1k | R_0603_1608Metric | R27, R29 |
| 1 | 4.7k | R_0603_1608Metric | R31 |
| 4 | 2.2K 10k | R_0603_1608Metric | R32, R35, R38, R41 |
| 3 | 4.7K 4.7k | R_0603_1608Metric | R34, R37, R40 |
Fanny design files
The KiCad project lives in the rmskkn/fanny repository on GitHub; these links point at the commit this page was built from.
Fanny: common questions
How big is the Fanny PCB?
The Fanny measures 81 × 78 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fanny?
97 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fanny design files?
From the rmskkn/fanny repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fanny design in my own project?
Yes, under the terms of its GPL-3.0 license, which rmskkn chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956