Wattwiser
rndfm·wattwiser_pcb·pcb/wattwiser.kicad_pcb
About the Wattwiser PCB
Wattwiser is an open source ESP32 PCB design by rndfm, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 45 components from 29 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the LM2596S-3.3, ACPL-214-500E, DB128V-5.0-2P and MOC3021M. By type, the board carries 17 resistors, 7 ICs, 7 capacitors, 4 transistors, 4 diodes and 2 connectors.
Main components on the Wattwiser
Wattwiser bill of materials (BOM)
45 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32D | U1 |
| 1 | LM2596S-3.3 | TO-263-5_TabPin3 | U2 |
| 1 | ACPL-214-500E | SOP-4_4.4x2.6mm_P1.27mm | U3 |
| 3 | DB128V-5.0-2P | CONN-TH_2P-P5.00_DB128V-5.0-2P | U5, U6, U7 |
| 1 | MOC3021M | DIP-6_L7.3-W6.5-P2.54-LS7.6-BL | U8 |
| 1 | MMBT2222A | SOT-23 | Q1 |
| 2 | MMBT3904 | SOT-23 | Q2, Q3 |
| 1 | C130426 BT136-600D,127 | TO-220-3_L10.0-W4.5-P2.54-T | Q6 |
| 2 | CONN_01X06_PIN Conn_01x06_Pin | PinSocket_1x06_P2.54mm_Vertical | J1, J5 |
| 1 | JK-NSMD010/60V | F1206 | F2 |
| 1 | IRM-05-5 | IRM055 | PS2 |
| 1 | MHPA3528RGBCT | LED-ARRAY-SMD_4P-L3.5-W2.8-TL | LED1 |
| 3 | LED | LED_D5.0mm | D2, D3, D4 |
| 1 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D5 |
| 1 | 33UH 33uH | IND-SMD_L7.3-W6.6 | L2 |
| 1 | 100NF 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 22UF 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 2 | 100NF 100nF | C0402 | C3, C9 |
| 1 | 220UF 220uF | CAP-TH_BD6.3-P2.50-D1.0-FD | C4 |
| 1 | 10NF 10nF | CAP-TH_L5.5-W3.2-P5.00-D1.0 | C5 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 680UF 680uf | CAP-TH_BD8.0-P3.50-D0.6-FD | C7 |
| 2 | R16K | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1, R16 |
| 2 | R10K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R10 |
| 6 | R1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R7, R8, R9, R11, R12 |
| 3 | R220 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R6 |
| 1 | 200R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13 |
| 1 | 100R | R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R14 |
| 1 | 360R | R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R18 |
| 1 | 14D471K_C8852 | RES-TH_L16.5-W5.9-P7.50-D0.8-S3.00 | R19 |
Wattwiser design files
The KiCad project lives in the rndfm/wattwiser_pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/wattwiser.kicad_pcb
- Schematicpcb/wattwiser.kicad_sch
- BOMpcb/production/bom.csv
Wattwiser: common questions
What microcontroller does the Wattwiser use?
The Wattwiser is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Wattwiser PCB?
The Wattwiser measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Wattwiser?
45 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wattwiser design files?
From the rndfm/wattwiser_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wattwiser design in my own project?
The repository has no license, so all rights stay with rndfm. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Wattwiser without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k