TowerForagingPark Hardware
robbe-neuroteam·TowerForagingPark_Hardware·hardware/pcb/kicad/SolenoidPi-HAT/SolenoidPi-HAT.kicad_pcb
About the TowerForagingPark Hardware PCB
TowerForagingPark Hardware is an open source PCB design by robbe-neuroteam, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 91.4 × 119.4 mm, with 23 components from 6 distinct parts.
Other key parts include the MCP23017_SP and ULN2803A. By type, the board carries 20 connectors and 3 ICs.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Preprint : https://www.biorxiv.org/content/10.1101/2025.09.09.675194v1 Article : soon
Preprint : https://www.biorxiv.org/content/10.1101/2025.09.09.675194v1 Article : soon
The maze is composed of the following parts : - Tiles - Laser cut in 6 mm thick transparent PMMA with a 60W CO2 laser cutter; - Pilars - 3D printed in black PLA, with a filament 3D printer; - Walls - Laser cut in 3 mm thick PMMA with a 60W CO2 laser cutter;
Optional: - Sensor holders - 3D printed in black PLA, with a filament 3D printer.

Main components on the TowerForagingPark Hardware
TowerForagingPark Hardware bill of materials (BOM)
23 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017_SP | DIP-28_W7.62mm | U1 |
| 2 | ULN2803A | DIP-18_W7.62mm | U2, U3 |
| 2 | Barrel_Jack_Switch | BarrelJack_Wuerth_6941xx301002 | J1, J6 |
| 16 | Conn_01x07_Socket | PinSocket_1x07_P2.54mm_Vertical | J2, J3, J4, J5, J7, J8, J9, J10 +8 |
| 1 | Conn_01x20_Pin | PinHeader_1x20_P2.54mm_Vertical | J11 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1 |
TowerForagingPark Hardware design files
The KiCad project lives in the robbe-neuroteam/TowerForagingPark_Hardware repository on GitHub; these links point at the commit this page was built from.
TowerForagingPark Hardware: common questions
How big is the TowerForagingPark Hardware PCB?
The TowerForagingPark Hardware measures 91.4 × 119.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TowerForagingPark Hardware?
23 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the TowerForagingPark Hardware design files?
From the robbe-neuroteam/TowerForagingPark_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TowerForagingPark Hardware design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which robbe-neuroteam chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k