GIMIX BaudRateGenerator
About the GIMIX BaudRateGenerator PCB
GIMIX BaudRateGenerator is an open source PCB design by roberto314, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 58.4 × 83.8 mm, with 19 components from 17 distinct parts.
Other key parts include the MC14411, 4512, 4069 and 74LS244. By type, the board carries 7 connectors, 4 ICs, 3 capacitors, 2 resistors and 1 crystal.
From the project
Reproducing SS-50 and SS-30 cards and GIMIX Ghost Case and Mainboard
This Repository is for primarily my GIMIX Ghost Reproduction and various SS-30 and SS-50 Cards.
- GIMIX DMA SASI board finished, no PALs, production ready, gerbers exported
- GIMIX DMA SASI board production version, second Regulator added
- GIMIX dumb two port serial board finished, no PALs, production possible
- Tanner 64k SRAM board finished, no PALs, production possible
Main components on the GIMIX BaudRateGenerator
GIMIX BaudRateGenerator bill of materials (BOM)
19 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC14411 | DIP-24_W15.24mm | U1 |
| 1 | 4512 | DIP-16_W7.62mm | U2 |
| 1 | 4069 | DIP-14_W7.62mm | U3 |
| 1 | 74LS244 | DIP-20_W7.62mm | U4 |
| 1 | 1M8324 | Crystal_HC33-U_Horizontal | Y1 |
| 1 | Mainboard | SS-10_new | J1 |
| 1 | A | PinHeader_2x10_P2.54mm_Vertical | J4 |
| 1 | B | PinHeader_2x10_P2.54mm_Vertical | J5 |
| 1 | C | PinHeader_2x10_P2.54mm_Vertical | J6 |
| 1 | D | PinHeader_2x10_P2.54mm_Vertical | J7 |
| 1 | E | PinHeader_2x10_P2.54mm_Vertical | J8 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J9 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | CA1 |
| 1 | Range | PinHeader_1x06_P2.54mm_Vertical | JA1 |
| 3 | 100n | C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3 |
| 1 | 10M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | R_Network07 | R_Array_SIP8 | RN1 |
GIMIX BaudRateGenerator design files
The KiCad project lives in the roberto314/GIMIX_reproduction repository on GitHub; these links point at the commit this page was built from.
GIMIX BaudRateGenerator: common questions
How big is the GIMIX BaudRateGenerator PCB?
The GIMIX BaudRateGenerator measures 58.4 × 83.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GIMIX BaudRateGenerator?
19 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the GIMIX BaudRateGenerator design files?
From the roberto314/GIMIX_reproduction repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GIMIX BaudRateGenerator design in my own project?
Yes, under the terms of its BSD-2-Clause license, which roberto314 chose for the repository.
More boards in GIMIX_reproduction
6809 Plus EPROM Version
248.9 × 139.7 mm165 parts2LBSD-2-Clause1
GIMIX 6809 CPU Plus
248.9 × 139.7 mm165 parts2LBSD-2-Clause1
GIMIX DMA Floppy
248.9 × 139.7 mm124 parts2LBSD-2-Clause1
GIMIX 256k SRAM
247.7 × 140.3 mm104 parts2LBSD-2-Clause1
Tanner 64k SRAM
242.1 × 148.6 mm100 parts2LBSD-2-Clause1
GIMIX Mainboard
482.6 × 228.6 mm80 parts2LBSD-2-Clause1
GIMIX Ghost 6800
228.6 × 142.2 mm74 parts2LBSD-2-Clause1
GIMIX DMA SASI
249.9 × 140.7 mm71 parts2LBSD-2-Clause1
GIMIX intelligent 3 port Serial
149.9 × 139.7 mm69 parts2LBSD-2-Clause1
GIMIX Serial dumb
132.4 × 88.4 mm47 parts2LBSD-2-Clause1