GIMIX Serial dumb

roberto314·GIMIX_reproduction·boards/GIMIX Serial dumb/GIMIX Serial dumb/GIMIX Serial dumb.kicad_pcb

GIMIX Serial dumb PCB layout, top view — open source board by roberto314

About the GIMIX Serial dumb PCB

GIMIX Serial dumb is an open source PCB design by roberto314, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 132.4 × 88.4 mm, with 47 components from 19 distinct parts.

Other key parts include the LM7805_TO220, 75189, MC6850_new, 75188 and 74LS02. By type, the board carries 17 capacitors, 9 ICs, 6 connectors, 6 diodes, 4 resistors and 2 jumpers.

From the project

Reproducing SS-50 and SS-30 cards and GIMIX Ghost Case and Mainboard

This Repository is for primarily my GIMIX Ghost Reproduction and various SS-30 and SS-50 Cards.

- GIMIX DMA SASI board finished, no PALs, production ready, gerbers exported

- GIMIX DMA SASI board production version, second Regulator added

- GIMIX dumb two port serial board finished, no PALs, production possible

- Tanner 64k SRAM board finished, no PALs, production possible

Main components on the GIMIX Serial dumb

LM7805_TO220 75189 MC6850_new 75188 74LS02 L7812 L7912

GIMIX Serial dumb bill of materials (BOM)

47 components, 19 distinct parts.

Qty	Part	Footprint	Refs
1	LM7805_TO220	TO-220-3_Horizontal_TabDown	U1
2	75189	DIP-14_W7.62mm	U2, U6
2	MC6850_new	DIP-24_W15.24mm	U3, U4
1	75188	DIP-14_W7.62mm	U5
1	74LS02	DIP-14_W7.62mm	U8
1	L7812	TO-92L_Wide	U9
1	L7912	TO-92L_Wide	U10
2	RS232 Port	PinHeader_2x13_P2.54mm_Horizontal	J1, J3
2	Conn_01x13	PinHeader_1x13_P2.54mm_Vertical	J2, J4
1	Power	PinHeader_1x04_P2.54mm_Vertical	J5
1	SS30 Bus	SS-30_new	P1
2	BAUD	PinHeader_2x06_P2.54mm_Vertical	JA1, JB1
1	IRQ	PinHeader_2x04_P2.54mm_Vertical	JI1
2	Echo	PinHeader_1x02_P2.54mm_Vertical	JP1, JP2
6	1N4148	D_A-405_P7.62mm_Horizontal	D1, D2, D3, D4, D5, D6
2	?	CP_Radial_D6.3mm_P2.50mm	C1, C2
4	100p	C_Disc_D4.7mm_W2.5mm_P5.00mm	C3, C4, C5, C6
11	100n	C_Disc_D3.4mm_W2.1mm_P2.50mm	C7, C8, C9, C10, C11, C12, C13, C14 +3
4	10k	R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal	R1, R2, R3, R4

GIMIX Serial dumb design files

The KiCad project lives in the roberto314/GIMIX_reproduction repository on GitHub; these links point at the commit this page was built from.

GIMIX Serial dumb: common questions

How big is the GIMIX Serial dumb PCB?

The GIMIX Serial dumb measures 132.4 × 88.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GIMIX Serial dumb?

47 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the GIMIX Serial dumb design files?

From the roberto314/GIMIX_reproduction repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the GIMIX Serial dumb design in my own project?

Yes, under the terms of its BSD-2-Clause license, which roberto314 chose for the repository.

More boards in GIMIX_reproduction