HardLabs

Tanner 64k SRAM

roberto314·GIMIX_reproduction·boards/Tanner 64k SRAM/Tanner 64k SRAM.kicad_pcb

Tanner 64k SRAM PCB layout, top view — open source board by roberto314

About the Tanner 64k SRAM PCB

Tanner 64k SRAM is an open source PCB design by roberto314, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 242.1 × 148.6 mm, with 100 components from 17 distinct parts.

Other key parts include the 74LS266, 2k2, 74LS20, 74LS138 and 74LS04. By type, the board carries 42 capacitors, 32 crystals, 21 ICs, 2 switches, 1 connector and 1 diode.

From the project

Reproducing SS-50 and SS-30 cards and GIMIX Ghost Case and Mainboard

This Repository is for primarily my GIMIX Ghost Reproduction and various SS-30 and SS-50 Cards.

- GIMIX DMA SASI board finished, no PALs, production ready, gerbers exported

- GIMIX DMA SASI board production version, second Regulator added

- GIMIX dumb two port serial board finished, no PALs, production possible

- Tanner 64k SRAM board finished, no PALs, production possible

Main components on the Tanner 64k SRAM

74LS2662k274LS2074LS13874LS0474LS0074LS3074LS24474LS242LM7805_TO220

Tanner 64k SRAM bill of materials (BOM)

100 components, 17 distinct parts.

QtyPartRefs
1
74LS266
U1
5
2k2
U2, U8, U11, U14, U17
1
74LS20
U3
5
74LS138
U4, U9, U10, U13, U16
1
74LS04
U5
1
74LS00
U6
1
74LS30
U7
2
74LS244
U12, U15
2
74LS242
U18, U19
2
LM7805_TO220
U33, U34
32
6116
X1, X2, X3, X4, X5, X6, X7, X8 +24
1
SS-50 Bus
P1
2
SW_DIP_x08
S1, S2
1
RED
D1
4
10u
C1, C2, C3, C4
38
100n
C5, C6, C7, C8, C9, C10, C11, C12 +30
1
220E
R1

Tanner 64k SRAM design files

The KiCad project lives in the roberto314/GIMIX_reproduction repository on GitHub; these links point at the commit this page was built from.

Tanner 64k SRAM: common questions

How big is the Tanner 64k SRAM PCB?

The Tanner 64k SRAM measures 242.1 × 148.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tanner 64k SRAM?

100 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tanner 64k SRAM design files?

From the roberto314/GIMIX_reproduction repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tanner 64k SRAM design in my own project?

Yes, under the terms of its BSD-2-Clause license, which roberto314 chose for the repository.

More boards in GIMIX_reproduction