TsunamiPi
robertsonics·TsunamiPi_PCB
About the TsunamiPi PCB
TsunamiPi is an open source Microchip SAM PCB design by robertsonics, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 84 components from 30 distinct parts.
Its main chip is the ATSAMS70J19A-AN, from the Microchip SAM family. Other key parts include the LM1117MP-3.3/NOPB and ADAU1328BSTZ. By type, the board carries 51 capacitors, 17 resistors, 5 inductors, 4 connectors, 3 ICs and 2 jumpers.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
8-Out 2-In Multichannel Audio HAT
Main components on the TsunamiPi
TsunamiPi bill of materials (BOM)
84 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMS70J19A-AN LQFP64_10X10_MCH Microchip | ATSAMS70J19A-AN | U1 |
| 1 | LM1117MP-3.3/NOPB LM1117-3.3 National Semi | SOT-223-3_TabPin2 | U2 |
| 1 | ADAU1328BSTZ ST_48_ADI Analog Devices | ADAU1328BSTZ | U3 |
| 1 | 9C-11.2896MAAJ-T ABLS-LR-11.2896 TXC Corp | XTAL_ABLS-24.000MHZ-B4-T | Y1 |
| 1 | CONN_02X20 RPi_GPIO | Pin_Header_Straight_2x20 | J1 |
| 1 | 62201021121 CONN_62201021121_WRE | 62201021121 | J2 |
| 1 | CONN_02X12 Conn_02x12_Odd_Even | PinHeader_2x12_P2.54mm_Vertical | J3 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 2 | SB | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | LTST-C191TBKT LED LITEON | LED_0603_1608Metric | D1 |
| 2 | FBMH1608HL471-T 470 Taiyo Yuden | L_0603_1608Metric | FB1, FB2 |
| 2 | KPZ1608SHR601ATD25 600R TDK Corp | L_0603_1608Metric | FB3, FB4 |
| 1 | MLZ1608M100WTD25 10uH TDK Corp | L_0603_1608Metric | L1 |
| 18 | C0603C104K9PAC7867 0.1uF | C_0603_1608Metric | C1, C2, C3, C6, C7, C8, C9, C10 +10 |
| 1 | C0603C225K8PACTU 2.2uF | C_0603_1608Metric | C4 |
| 2 | CC0805KRX5R6BB106 10uF | C_0805_2012Metric | C5, C37 |
| 1 | CC0603MRX5R6BB475 4.7uF | C_0603_1608Metric | C11 |
| 2 | CBR06C200FAGAC 20pF | C_0603_1608Metric | C12, C13 |
| 8 | TACR226K006XTA 22uF | C_0805_2012Metric | C16, C17, C18, C19, C20, C21, C22, C23 |
| 17 | C0603C105K4PACTU 1.0uF | C_0603_1608Metric | C24, C25, C26, C27, C28, C29, C30, C31 +9 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 06035C562JAT2A 5.6nF | C_0603_1608Metric | C45 |
| 1 | C0603C394J4RAC7867 390nF | C_0603_1608Metric | C48 |
| 1 | RMCF0603FT2R20 2.2 | R_0603_1608Metric | R1 |
| 1 | RMCF0603FT10K0 10K | R_0603_1608Metric | R2 |
| 1 | RMCF0603FT330R 330 | R_0603_1608Metric | R3 |
| 3 | RMCF0603FT100K 100K | R_0603_1608Metric | R4, R5, R6 |
| 8 | RMCF0603JT10R0 10 | R_0603_1608Metric | R7, R8, R9, R10, R11, R12, R13, R14 |
| 1 | RMCF0603FT390R 390 | R_0603_1608Metric | R15 |
| 1 | RMCF0603FT240R 240 | R_0603_1608Metric | R16 |
| 1 | RMCF0603FT560R 560 | R_0603_1608Metric | R17 |
TsunamiPi design files
The KiCad project lives in the robertsonics/TsunamiPi_PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutTsunamiHat.kicad_pcb
- SchematicTsunamiHat.kicad_sch
- BOMBOM/TsunamiHat_BOM_Rev1.xlsx
TsunamiPi: common questions
What microcontroller does the TsunamiPi use?
The TsunamiPi is built around the ATSAMS70J19A-AN, from the Microchip SAM family.
How big is the TsunamiPi PCB?
The TsunamiPi measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TsunamiPi?
84 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TsunamiPi design files?
From the robertsonics/TsunamiPi_PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TsunamiPi design in my own project?
The repository has no license, so all rights stay with robertsonics. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TsunamiPi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416