Lv regs
robmacl·ilemt_hw·main/lv_regs/lv_regs.kicad_pcb
About the Lv regs PCB
Lv regs is an open source PCB design by robmacl, published on GitHub. It is a 2-layer board measuring 176 × 70 mm, with 56 components from 17 distinct parts.
By type, the board carries 31 capacitors, 12 inductors, 7 resistors, 3 modules, 2 connectors and 1 fuse.
From the project
Hardware design files for ILEMT position tracker
Lv regs bill of materials (BOM)
56 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | APXW003A0X3-SRZ | APXW003A0X3-SRZ | M1, M2, M3 |
| 1 | Output | PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | Input | Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | J2 |
| 1 | 3A | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 2 | 300 Ohm | C_2220_5650Metric | FB1, FB2 |
| 6 | 180 Ohm | L_0805_2012Metric | FB3, FB4, FB5, FB6, FB7, FB8 |
| 4 | 4.7uH | taiyo_yuden_smt_inductor_4.9x4.9 | L1, L2, L3, L4 |
| 13 | 10uF 50V | C_1210_3225Metric | C1, C2, C6, C7, C8, C9, C13, C14 +5 |
| 4 | 10nF 50V | C_0603_1608Metric | C3, C10, C26, C31 |
| 3 | C comp | C_0603_1608Metric | C4, C11, C27 |
| 3 | 10nF 25V | cap_smd_0306 | C5, C12, C28 |
| 5 | 10uF 6.3V | C_0603_1608Metric | C16, C17, C18, C19, C20 |
| 1 | 100uF | CP_Elec_8x6.7 | C21 |
| 2 | 10uF 16V | C_0805_2012Metric | C22, C23 |
| 3 | R comp | R_0603_1608Metric | R1, R3, R5 |
| 3 | V set | R_0603_1608Metric | R2, R4, R6 |
| 1 | DNP | R_2816_7142Metric | R7 |
Lv regs design files
The KiCad project lives in the robmacl/ilemt_hw repository on GitHub; these links point at the commit this page was built from.
Lv regs: common questions
How big is the Lv regs PCB?
The Lv regs measures 176 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lv regs?
56 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lv regs design files?
From the robmacl/ilemt_hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Lv regs design in my own project?
The repository has no license, so all rights stay with robmacl. Use it as a reference, and ask the author before reusing the design.
More boards in ilemt_hw
Input board
robmacl
270 × 100 mm384 parts4LNo license0Dac board
robmacl
280 × 100 mm188 parts4LNo license0Main board
robmacl
208.3 × 261.9 mm181 parts4LNo license0In panel
robmacl
200 × 100 mm110 parts4LNo license0Low power
robmacl
207 × 108 mm58 parts2LNo license0Out filter
robmacl
207 × 108 mm58 parts2LNo license0Sma breakout
robmacl
39 × 15 mm7 parts2LNo license0