Dac board
robmacl·ilemt_hw·dac/dac_board.kicad_pcb
About the Dac board
Dac board is an open source PCB design by robmacl, published on GitHub. It is a 4-layer board measuring 280 × 100 mm, with 188 components from 46 distinct parts.
Other key parts include the OPA2210, 74LVC541A, OPA1611, MCP1755S-3302E/DB and NCP1117STAT3G. By type, the board carries 74 capacitors, 65 resistors, 19 ICs, 14 diodes, 6 test points and 5 connectors.
From the project
Hardware design files for ILEMT position tracker
Main components on the Dac board
Dac board bill of materials (BOM)
188 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | OPA2210 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U101, U201, U301, U401 |
| 1 | 74LVC541A | my-SSOP-20_5.3x7.2mm_P0.65mm | U2 |
| 5 | OPA1611 | SOIC-8_3.9x4.9mm_P1.27mm | U3, U102, U202, U302, U402 |
| 1 | MCP1755S-3302E/DB | SOT-223-3_TabPin2 | U4 |
| 1 | NCP1117STAT3G | SOT-223 | U5 |
| 1 | LM337_SOT223 | SOT-223-3_TabPin2 | U6 |
| 1 | DS90LV048 | TSSOP-16_4.4x5mm_P0.65mm | U17 |
| 2 | 74AUP1G74 | VSSOP-8_2.3x2mm_P0.5mm | U18, U19 |
| 2 | PCM1794A | SSOP-28_5.3x10.2mm_P0.65mm | U151, U351 |
| 1 | 2STD1665T4 | TO-252-3_TabPin2 | Q1 |
| 1 | Out 1 | RF_SMA_Vertical_5-1814832-1 | J1 |
| 1 | Out 2 | RF_SMA_Vertical_5-1814832-1 | J2 |
| 1 | Out 3 | RF_SMA_Vertical_5-1814832-1 | J3 |
| 1 | Out 4 | RF_SMA_Vertical_5-1814832-1 | J4 |
| 1 | Aux power | molex_kk100_PinHeader_1x3_P2.54_Drill1.1mm | J5 |
| 1 | VCOM | TestPoint_Keystone_5000-5004_Miniature | TP1 |
| 1 | +3.3V | TestPoint_Keystone_5000-5004_Miniature | TP2 |
| 1 | +5V DAC_VCC | TestPoint_Keystone_5000-5004_Miniature | TP3 |
| 1 | +8V | TestPoint_Keystone_5000-5004_Miniature | TP4 |
| 1 | -12V | TestPoint_Keystone_5000-5004_Miniature | TP5 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VREF | TestPoint_Keystone_5000-5004_Miniature | TP7 |
| 2 | 5V (standoff) | D_SMA | D1, D4 |
| 4 | 15V (standoff) | D_SMA | D2, D3, D5, D6 |
| 8 | BAV99 | SOT-23 | D101, D102, D201, D202, D301, D302, D401, D402 |
| 4 | 180 Ohm | L_0805_2012Metric | FB1, FB2, FB3, FB4 |
| 6 | 10nF | C_0805_2012Metric | C1, C4, C109, C209, C309, C409 |
| 24 | 1uF | C_0805_2012Metric | C2, C3, C9, C10, C11, C12, C18, C19 +16 |
| 1 | 3.3 uF | C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | C5 |
| 5 | 100nF | C_0603_1608Metric | C6, C7, C75, C76, C77 |
| 11 | 10uF 16V | C_0805_2012Metric | C8, C20, C21, C151, C152, C153, C154, C351 +3 |
| 2 | 330uF | CP_Elec_8x6.7 | C13, C17 |
| 1 | 220pF | C_0603_1608Metric | C14 |
| 8 | 47uF | CP_Elec_6.3x7.7 | C15, C16, C22, C23, C155, C156, C355, C356 |
| 16 | 4.7nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C101, C102, C105, C106, C201, C202, C205, C206 +8 |
| 4 | 2K | R_0805_2012Metric | R7, R8, R9, R10 |
| 3 | 10K | R_0603_1608Metric | R11, R151, R351 |
| 1 | 8.2K | R_0603_1608Metric | R12 |
| 2 | 1K | R_0603_1608Metric | R13, R19 |
| 2 | 0 | R_0603_1608Metric | R14, R15 |
| 17 | 10 | R_0805_2012Metric | R16, R107, R108, R109, R152, R153, R207, R208 +9 |
| 4 | 200 | R_0603_1608Metric | R17, R18, R21, R22 |
| 1 | 1.74K | R_0603_1608Metric | R20 |
| 4 | 100 | R_0603_1608Metric | R61, R62, R63, R64 |
| 16 | 820 | R_0603_1608Metric | R101, R102, R103, R104, R201, R202, R203, R204 +8 |
| 8 | 620 | R_0603_1608Metric | R105, R106, R205, R206, R305, R306, R405, R406 |
| 3 | 33 | R_Array_Convex_4x0603 | RN1, RN2, RN3 |
Dac board design files
The KiCad project lives in the robmacl/ilemt_hw repository on GitHub; these links point at the commit this page was built from.
Dac board: common questions
How big is the Dac board?
The Dac board measures 280 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Dac board?
188 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dac board design files?
From the robmacl/ilemt_hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Dac board design in my own project?
The repository has no license, so all rights stay with robmacl. Use it as a reference, and ask the author before reusing the design.
More boards in ilemt_hw
Input board
robmacl
270 × 100 mm384 parts4LNo license0Main board
robmacl
208.3 × 261.9 mm181 parts4LNo license0In panel
robmacl
200 × 100 mm110 parts4LNo license0Low power
robmacl
207 × 108 mm58 parts2LNo license0Out filter
robmacl
207 × 108 mm58 parts2LNo license0Lv regs
robmacl
176 × 70 mm56 parts2LNo license0Sma breakout
robmacl
39 × 15 mm7 parts2LNo license0