In panel
robmacl·ilemt_hw·in_panel/in_panel.kicad_pcb
About the In panel PCB
In panel is an open source PCB design by robmacl, published on GitHub. It is a 4-layer board measuring 200 × 100 mm, with 110 components from 16 distinct parts.
Other key parts include the MCP23008-xSO. By type, the board carries 26 diodes, 24 inductors, 22 capacitors, 10 connectors, 9 resistors and 1 IC.
From the project
Hardware design files for ILEMT position tracker
Main components on the In panel
In panel bill of materials (BOM)
110 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23008-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U101 |
| 1 | LED control | molex_kk100_PinHeader_1x4_P2.54_Drill1.1mm | J101 |
| 3 | Input card | RJ45_Amphenol_RJHSE-338x | J201, J701, J1201 |
| 3 | Sensor | RJ45_Amphenol_RJHSE-338x | J601, J1101, J1601 |
| 3 | Sensor | HR10_connector | J602, J1102, J1602 |
| 9 | 2036-07-SMLF | GDT_3LINE_Bourns_2036-xx-SM | E301, E401, E501, E801, E901, E1001, E1301, E1401 +1 |
| 9 | 4.7mH | L_CommonMode_Bourns_DR331 | FL301, FL401, FL501, FL801, FL901, FL1001, FL1301, FL1401 +1 |
| 1 | Power | LED_Wurth-PLCC4_3.2x2.8mm | D101 |
| 1 | Ready | LED_Wurth-PLCC4_3.2x2.8mm | D102 |
| 3 | 150141RV73100 | LED_Wurth-PLCC4_3.2x2.8mm | D201, D701, D1201 |
| 18 | 8V | D_SOD-323 | D301, D302, D401, D402, D501, D502, D801, D802 +10 |
| 3 | 5V (standoff) | D_SMA | D601, D1101, D1601 |
| 24 | 2K Ohm | L_0805_2012Metric | FB301, FB302, FB401, FB402, FB501, FB502, FB601, FB602 +16 |
| 1 | 10 uF | C_0603_1608Metric | C101 |
| 21 | 1nF | C_0805_2012Metric | C301, C302, C401, C402, C501, C502, C601, C801 +13 |
| 9 | 200 | R_0603_1608Metric | R101, R102, R103, R201, R202, R701, R702, R1201 +1 |
In panel design files
The KiCad project lives in the robmacl/ilemt_hw repository on GitHub; these links point at the commit this page was built from.
In panel: common questions
How big is the In panel PCB?
The In panel measures 200 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the In panel?
110 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the In panel design files?
From the robmacl/ilemt_hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the In panel design in my own project?
The repository has no license, so all rights stay with robmacl. Use it as a reference, and ask the author before reusing the design.
More boards in ilemt_hw
Input board
robmacl
270 × 100 mm384 parts4LNo license0Dac board
robmacl
280 × 100 mm188 parts4LNo license0Main board
robmacl
208.3 × 261.9 mm181 parts4LNo license0Low power
robmacl
207 × 108 mm58 parts2LNo license0Out filter
robmacl
207 × 108 mm58 parts2LNo license0Lv regs
robmacl
176 × 70 mm56 parts2LNo license0Sma breakout
robmacl
39 × 15 mm7 parts2LNo license0