Main board
robmacl·ilemt_hw·main/main_board/main_board.kicad_pcb
About the Main board
Main board is an open source PCB design by robmacl, published on GitHub. It is a 4-layer board measuring 208.3 × 261.9 mm, with 181 components from 67 distinct parts.
Other key parts include the MAX6220ASA-5.0+, OPA209, MCP1755S-3302E/DB, DS90LV048 and AP7361C-25SP-13. By type, the board carries 76 capacitors, 37 resistors, 24 test points, 15 ICs, 12 connectors and 8 inductors.
From the project
Hardware design files for ILEMT position tracker
Main components on the Main board
Main board bill of materials (BOM)
181 components, 67 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX6220ASA-5.0+ | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | OPA209 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 2 | MCP1755S-3302E/DB | SOT-223-3_TabPin2 | U3, U4 |
| 1 | DS90LV048 | TSSOP-16_4.4x5mm_P0.65mm | U5 |
| 1 | AP7361C-25SP-13 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U6 |
| 1 | MCP1755S-5002E/DB | SOT-223-3_TabPin2 | U7 |
| 1 | DAC80004IPW | TI_R_PDSO_G14 | U8 |
| 2 | 74LVC541A | my-SSOP-20_5.3x7.2mm_P0.65mm | U9, U14 |
| 1 | 74AUP1G74 | VSSOP-8_2.3x2mm_P0.5mm | U10 |
| 4 | FIN1047 | TSSOP-16_4.4x5mm_P0.65mm | U12, U15, U16, U17 |
| 1 | microzed | Microzed | M1 |
| 1 | 570CAC000121DG | QFN-8_5x7_Pitch2.54mm | X2 |
| 1 | Power | PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | MCLK | MMCX_Molex_73415-1471_Vertical | J2 |
| 1 | DEBUG | MMCX_Molex_73415-1471_Vertical | J3 |
| 1 | CLOCK | MMCX_Molex_73415-1471_Vertical | J4 |
| 1 | Debug | PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | SCKB | MMCX_Molex_73415-1471_Vertical | J7 |
| 1 | SCKA | MMCX_Molex_73415-1471_Vertical | J8 |
| 5 | PCIE 8x female | PCIE_8x_female | P2, P3, P4, P5, P6 |
Show 47 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VREF+ | TestPoint_Keystone_5000-5004_Miniature | TP1 |
| 1 | VREF- | TestPoint_Keystone_5000-5004_Miniature | TP2 |
| 1 | BIST++ | TestPoint_Keystone_5000-5004_Miniature | TP3 |
| 1 | BIST-+ | TestPoint_Keystone_5000-5004_Miniature | TP4 |
| 1 | VCCIO_EN | TestPoint_Keystone_5000-5004_Miniature | TP6 |
| 1 | VCCO | TestPoint_Keystone_5000-5004_Miniature | TP7 |
| 1 | SCL | TestPoint_Keystone_5000-5004_Miniature | TP8 |
| 1 | SDA | TestPoint_Keystone_5000-5004_Miniature | TP9 |
| 1 | PROBE_CONFIG | TestPoint_Keystone_5000-5004_Miniature | TP10 |
| 1 | BIST+- | TestPoint_Keystone_5000-5004_Miniature | TP11 |
| 1 | -6V | TestPoint_Keystone_5000-5004_Miniature | TP12 |
| 1 | Earth | TestPoint_Keystone_5000-5004_Miniature | TP13 |
| 1 | +10V | TestPoint_Keystone_5000-5004_Miniature | TP14 |
| 1 | +5VDIG | TestPoint_Keystone_5000-5004_Miniature | TP18 |
| 1 | +5VANA | TestPoint_Keystone_5000-5004_Miniature | TP19 |
| 1 | OVDD | TestPoint_Keystone_5000-5004_Miniature | TP20 |
| 1 | SCLK | TestPoint_Keystone_5000-5004_Miniature | TP21 |
| 1 | MOSI | TestPoint_Keystone_5000-5004_Miniature | TP22 |
| 1 | SYNC | TestPoint_Keystone_5000-5004_Miniature | TP23 |
| 1 | BIST-- | TestPoint_Keystone_5000-5004_Miniature | TP24 |
| 4 | GND | TestPoint_Keystone_5000-5004_Miniature | TP26, TP28, TP29, TP30 |
| 2 | 10V (standoff) | D_SMA | D1, D2 |
| 1 | 5V (standoff) | D_SMA | D3 |
| 1 | LED1 | WURTH_WL_SCMD_0603_LED | D4 |
| 1 | LED2 | WURTH_WL_SCMD_0603_LED | D5 |
| 1 | LED3 | WURTH_WL_SCMD_0603_LED | D6 |
| 1 | LED4 | WURTH_WL_SCMD_0603_LED | D7 |
| 6 | 2K Ohm | L_0805_2012Metric | FB1, FB2, FB4, FB5, FB6, FB8 |
| 1 | 300 Ohm | C_2220_5650Metric | FB3 |
| 1 | 180 Ohm | L_0805_2012Metric | FB7 |
| 16 | 10uF 16V | C_0805_2012Metric | C1, C2, C7, C10, C11, C25, C26, C29 +8 |
| 3 | 47uF | C_1210_3225Metric | C3, C6, C9 |
| 2 | 3.3uF | C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | C4, C5 |
| 2 | OPT | C_0603_1608Metric | C8, C66 |
| 5 | 330uF | CP_Elec_8x6.7 | C12, C13, C19, C20, C21 |
| 28 | 10uF | C_0603_1608Metric | C14, C15, C16, C17, C18, C22, C23, C24 +20 |
| 13 | 100nF | C_0603_1608Metric | C41, C42, C44, C46, C48, C49, C50, C51 +5 |
| 7 | 220pF | C_0603_1608Metric | C61, C62, C64, C65, C72, C73, C74 |
| 3 | 10 | R_0603_1608Metric | R1, R2, R4 |
| 1 | 40.2K | R_0603_1608Metric | R3 |
| 3 | 0 | R_0603_1608Metric | R5, R6, R12 |
| 5 | 1K | R_0603_1608Metric | R7, R23, R27, R40, R41 |
| 4 | 33 | R_0603_1608Metric | R8, R19, R20, R21 |
| 9 | 100 | R_0603_1608Metric | R9, R10, R11, R22, R24, R25, R28, R29 +1 |
| 3 | 1.5K | R_0603_1608Metric | R13, R18, R26 |
| 4 | 4.99K | R_0603_1608Metric | R14, R15, R16, R17 |
| 5 | 33x4 | R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4, RN5 |
Main board design files
The KiCad project lives in the robmacl/ilemt_hw repository on GitHub; these links point at the commit this page was built from.
Main board: common questions
How big is the Main board?
The Main board measures 208.3 × 261.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Main board?
181 components, from 67 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Main board design files?
From the robmacl/ilemt_hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Main board design in my own project?
The repository has no license, so all rights stay with robmacl. Use it as a reference, and ask the author before reusing the design.
More boards in ilemt_hw
Input board
robmacl
270 × 100 mm384 parts4LNo license0Dac board
robmacl
280 × 100 mm188 parts4LNo license0In panel
robmacl
200 × 100 mm110 parts4LNo license0Low power
robmacl
207 × 108 mm58 parts2LNo license0Out filter
robmacl
207 × 108 mm58 parts2LNo license0Lv regs
robmacl
176 × 70 mm56 parts2LNo license0Sma breakout
robmacl
39 × 15 mm7 parts2LNo license0