Out filter
robmacl·ilemt_hw·driver/out_filter/out_filter.kicad_pcb
About the Out filter PCB
Out filter is an open source PCB design by robmacl, published on GitHub. It is a 2-layer board measuring 207 × 108 mm, with 58 components from 21 distinct parts.
By type, the board carries 21 resistors, 15 capacitors, 7 test points, 6 connectors, 3 transformers and 3 inductors.
From the project
Hardware design files for ILEMT position tracker
Out filter bill of materials (BOM)
58 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Source | HIROSE_JR16RK-7S | J104 |
| 1 | I sense | RJ45_Amphenol_RJHSE-308x | J105 |
| 1 | V sense | RJ45_Amphenol_RJHSE-308x | J106 |
| 3 | Driver in | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J201, J301, J401 |
| 3 | 300:1 | Triad_CST_W1075 | T201, T301, T401 |
| 1 | Chassis | TestPoint_Keystone_5010-5014_Multipurpose | TP101 |
| 3 | In hot | TestPoint_Keystone_5000-5004_Miniature | TP201, TP301, TP401 |
| 3 | In com | TestPoint_Keystone_5000-5004_Miniature | TP202, TP302, TP402 |
| 3 | 3 turns | CT_jumper | W201, W301, W401 |
| 3 | 33 uH | Wurth_WE-HCF | L201, L301, L401 |
| 3 | 470 nF | C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 | C201, C205, C301 |
| 4 | DNP | C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 | C202, C302, C305, C405 |
| 6 | 10 nF | C_1206_3216Metric | C203, C204, C303, C304, C403, C404 |
| 2 | 100 nF | C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 | C401, C402 |
| 3 | 15 | R_Axial_DIN0516_L15.5mm_D5.0mm_P25.40mm_Horizontal | R201, R206, R306 |
| 5 | DNP | R_Axial_DIN0516_L15.5mm_D5.0mm_P25.40mm_Horizontal | R202, R301, R302, R401, R406 |
| 3 | 10K | R_1206_3216Metric | R203, R303, R403 |
| 3 | 100 | R_0603_1608Metric | R204, R304, R404 |
| 3 | 5.1 | R_0603_1608Metric | R205, R305, R405 |
| 3 | 0 | R_0603_1608Metric | R207, R307, R407 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47 | R_Axial_DIN0516_L15.5mm_D5.0mm_P25.40mm_Horizontal | R402 |
Out filter design files
The KiCad project lives in the robmacl/ilemt_hw repository on GitHub; these links point at the commit this page was built from.
Out filter: common questions
How big is the Out filter PCB?
The Out filter measures 207 × 108 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Out filter?
58 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Out filter design files?
From the robmacl/ilemt_hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Out filter design in my own project?
The repository has no license, so all rights stay with robmacl. Use it as a reference, and ask the author before reusing the design.
More boards in ilemt_hw
Input board
robmacl
270 × 100 mm384 parts4LNo license0Dac board
robmacl
280 × 100 mm188 parts4LNo license0Main board
robmacl
208.3 × 261.9 mm181 parts4LNo license0In panel
robmacl
200 × 100 mm110 parts4LNo license0Low power
robmacl
207 × 108 mm58 parts2LNo license0Lv regs
robmacl
176 × 70 mm56 parts2LNo license0Sma breakout
robmacl
39 × 15 mm7 parts2LNo license0