Duco

RobotMasterC·Duco·KiCad PCB/DuoMacro.kicad_pcb

Duco PCB layout, top view — open source Nordic nRF board by RobotMasterC

About the Duco PCB

Duco is an open source Nordic nRF PCB design by RobotMasterC, published on GitHub. It is a 2-layer board measuring 276.1 × 97.5 mm, with 116 components from 5 distinct parts.

Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 58 switches, 56 diodes and 2 ICs.

It belongs with the keyboards designs in this gallery.

From the project

Duco is a low profile split keyboard that has extra keys for macros and uses ZMK firmware

Duco is a low profile split keyboard that has extra keys for macros and uses ZMK firmware

It was made for Hack Clubs Blueprint program!

Duco, from the project README
From the project README

Main components on the Duco

Duco bill of materials (BOM)

116 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
XIAO-nRF52840-SMD
U1, U2
54
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +46
2
SW_Push
SW28, SW57
2
PCM12SMTR
SW29, SW58
56
~
D1, D2, D3, D4, D5, D6, D7, D8 +48

Duco design files

The KiCad project lives in the RobotMasterC/Duco repository on GitHub; these links point at the commit this page was built from.

Duco: common questions

What microcontroller does the Duco use?

The Duco is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.

How big is the Duco PCB?

The Duco measures 276.1 × 97.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Duco?

116 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Duco design files?

From the RobotMasterC/Duco repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Duco design in my own project?

The repository has no license, so all rights stay with RobotMasterC. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Duco without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards