Calc v2

rod520·calc-v2

Calc v2 PCB layout, top view — open source RP2040/RP2350 board by rod520

About the Calc v2 PCB

Calc v2 is an open source RP2040/RP2350 PCB design by rod520, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 111.4 mm, with 100 components from 26 distinct parts.

Its main chip is the RP2350B, from the RP2040/RP2350 family. Other key parts include the ISL91107IRTNZ-T, TPS92200D2DDC and BQ24074RGT. By type, the board carries 49 switches, 27 capacitors, 13 resistors, 4 ICs, 3 inductors and 2 connectors.

Main components on the Calc v2

ISL91107IRTNZ-TTPS92200D2DDCBQ24074RGTRP2350B

Calc v2 bill of materials (BOM)

100 components, 26 distinct parts.

QtyPartRefs
1
ISL91107IRTNZ-T
IC1
1
TPS92200D2DDC
U2
1
BQ24074RGT
U3
1
RP2350B
U5
1
ABM8-272-T3
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
1
Conn_01x02_MountingPin
J2
1
E26RE-RW300-N
DS1
49
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +41
1
AOTA-B201610S3R3-101-T
L1
1
10u
L2
1
1u
L3
13
100n
C1, C7, C9, C10, C11, C12, C13, C14 +5
7
4.7u
C2, C3, C6, C8, C24, C25, C33
2
15p
C4, C5
2
10u
C18, C38
3
22u
C35, C36, C37
1
33
R1
1
1k
R2
2
27
R3, R4
Show 6 more
QtyPartRefs
2
5.1K
R5, R6
1
10k
R7
1
2k
R8
1
3.09k
R9
3
46k4
R11, R12, R13
1
0.33
R14

Calc v2 design files

The KiCad project lives in the rod520/calc-v2 repository on GitHub; these links point at the commit this page was built from.

Calc v2: common questions

What microcontroller does the Calc v2 use?

The Calc v2 is built around the RP2350B, from the RP2040/RP2350 family.

How big is the Calc v2 PCB?

The Calc v2 measures 100 × 111.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Calc v2?

100 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Calc v2 design files?

From the rod520/calc-v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Calc v2 design in my own project?

Yes, under the terms of its MIT license, which rod520 chose for the repository.

Can I test firmware for the Calc v2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards