61 open source boards using the RP2350B

Real designs built with the RP2350B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

61 boardsClear filters|Most starred

How designs wire the RP2350B

Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the RP2350B connects to, and the resistors, capacitors and other passives placed on it.

  • The IOVDD_5 pin has a decoupling capacitor on 32 of 35 designs, most often 100 nF (then 10 µF).
  • The DVDD_10 pin has a decoupling capacitor on 32 of 35 designs, most often 100 nF (then 4.7 µF).
  • The XIN_30 pin has a crystal on 32 of 35 designs, most often 12 MHz.
  • The XIN_30 pin has a capacitor to GND on 32 of 35 designs, most often 15 pF (then 12 pF).
IOVDD_5pin 5Connected to: 3.3V 97%
  • Decoupling capacitor on 91% · 100 nF (86), 10 µF (1), 4.7 µF (1)
DVDD_10pin 10Connected to: 1.1V 91%
  • Decoupling capacitor on 91% · 100 nF (32), 4.7 µF (6), 1 µF (1)
IOVDD_15pin 15Connected to: 3.3V 97%
  • Decoupling capacitor on 89% · 100 nF (88), 1 µF (1), 10 µF (1)
IOVDD_24pin 24Connected to: 3.3V 97%
  • Decoupling capacitor on 80% · 100 nF (83), 4.7 µF (1)
IOVDD_29pin 29Connected to: 3.3V 97%
  • Decoupling capacitor on 83% · 100 nF (62), 4.7 µF (1)
XIN_30pin 30Connected to: Signal 100%
  • Crystal on 91% · 12 MHz (16)
  • Capacitor to GND on 91% · 15 pF (27), 12 pF (2), 10 pF (1)
XOUT_31pin 31Connected to: Signal 91%
  • Series resistor on 69% · 1 kΩ (24)
DVDD_32pin 32Connected to: 1.1V 91%
  • Decoupling capacitor on 77% · 100 nF (20), 4.7 µF (14), 1 µF (1)
IOVDD_41pin 41Connected to: 3.3V 97%
  • Decoupling capacitor on 86% · 100 nF (58), 4.7 µF (2), 22 µF (1)
IOVDD_50pin 50Connected to: 3.3V 97%
  • Decoupling capacitor on 86% · 100 nF (85), 4.7 µF (4), 22 µF (2)
DVDD_51pin 51Connected to: 1.1V 91%
  • Decoupling capacitor on 83% · 100 nF (31), 4.7 µF (7), 1 µF (1)
ADC_AVDD_59pin 59Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 80% · 100 nF (62), 4.7 µF (23), 22 µF (2)
IOVDD_60pin 60Connected to: 3.3V 97%
  • Decoupling capacitor on 86% · 100 nF (76), 4.7 µF (25), 22 µF (2)
VREG_AVDD_61pin 61Connected to: VREG_AVDD 63% · a signal 37%
  • Decoupling capacitor on 89% · 4.7 µF (28), 100 nF (6), 10 µF (2)
VREG_PGND_62pin 62Connected to: GND 94%
VREG_LX_63pin 63Connected to: VREG_LX 57% · a signal 34%
  • Inductor on 80% · 3.3 µH (20)
VREG_VIN_64pin 64Connected to: 3.3V 97%
  • Decoupling capacitor on 86% · 100 nF (70), 4.7 µF (25), 22 µF (1)
VREG_FB_65pin 65Connected to: 1.1V 80%
  • Decoupling capacitor on 77% · 4.7 µF (25), 100 nF (12), 10 µF (3)
  • Inductor on 74% · 3.3 µH (20)
USB_DM_66pin 66Connected to: Signal 97%
  • Series resistor on 91% · 27 Ω (23), 33 Ω (4), 22 Ω (4)
USB_DP_67pin 67Connected to: Signal 97%
  • Series resistor on 91% · 27 Ω (23), 33 Ω (4), 22 Ω (4)
USB_OTP_VDD_68pin 68Connected to: 3.3V 94%
  • Decoupling capacitor on 83% · 100 nF (72), 4.7 µF (24), 10 µF (1)
QSPI_IOVDD_69pin 69Connected to: 3.3V 97%
  • Decoupling capacitor on 86% · 100 nF (71), 4.7 µF (24), 10 µF (1)
QSPI_SS_75pin 75Connected to: Signal 97%
  • Series resistor on 80% · 1 kΩ (22), 0 Ω (8), 10 kΩ (2)
IOVDD_76pin 76Connected to: 3.3V 97%
  • Decoupling capacitor on 89% · 100 nF (89), 4.7 µF (21), 1 µF (1)
GND_81pin 81Connected to: GND 100%

56 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Frank core2 proto by rh1tech, SparkFun XRP Controller by sparkfun, RTShield by o7-machinehum and Tfr9 by strickyak.

The RP2350B in open source designs

The gallery holds 61 open source boards using the RP2350B from 38 GitHub repositories; a typical one measures about 97.8 × 74.8 mm and carries around 123 components.

85% use four copper layers or more, and 56% carry an open source license.

The most starred is Frank next by rh1tech.

Microcontrollers on boards using the RP2350B

RP2350B: common questions

Where can I find a RP2350B reference design?

Each of the 61 boards on this page is a real design using the RP2350B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the RP2350B IOVDD_5 pin?

The IOVDD_5 pin has a decoupling capacitor on 32 of 35 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 36 open source designs using the RP2350B.

What decoupling capacitors do designs use on the RP2350B DVDD_10 pin?

The DVDD_10 pin has a decoupling capacitor on 32 of 35 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 36 open source designs using the RP2350B.

How is the RP2350B XIN_30 pin connected?

The XIN_30 pin has a crystal on 32 of 35 designs, most often 12 MHz. Counted from the KiCad layouts of 36 open source designs using the RP2350B.

What parts are used alongside the RP2350B?

The W25Q128JVS, W25Q128JVSIQ, USBLC6-2SC6, W25Q128JVPIQ and APS6404L-3SQR-SN appear in the most repositories here.

Which microcontrollers do boards using the RP2350B use?

Most are built on RP2040/RP2350 (61).

How big is a typical board using the RP2350B?

The median is 97.8 × 74.8 mm, and 15% are two-layer designs.

What is the most popular open source board using the RP2350B?

By GitHub stars, Frank next by rh1tech, with 65 stars.

Can I simulate one of these boards using the RP2350B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part