Garbage Collector

Rouaa-spec·Garbage_Collector_PCB_Design·Hardware/.history/robot_canettes.kicad_pcb

Garbage Collector PCB layout, top view — open source STM32 board by Rouaa-spec

About the Garbage Collector PCB

Garbage Collector is an open source STM32 PCB design by Rouaa-spec, published on GitHub under the MIT license. It is a 4-layer board measuring 78 × 68 mm, with 98 components from 43 distinct parts.

Its main chip is the STM32G431RBTX, from the STM32 family. Other key parts include the MPU-6050, DRV8833PWP, AP2112K-3.3, BQ27220 and SN74AHCT1G125DBVR. By type, the board carries 42 capacitors, 26 resistors, 7 ICs, 4 diodes, 3 transistors and 2 modules.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

Conception Hardware de la carte électronique d'un robot de tri autonome : gestion de puissance (Alimentation Li-Ion / Chargeur), drivers moteurs et interfaçage de capteurs.

KiCad Local History Directory =============================

This directory contains automatic snapshots of your project files. KiCad periodically saves copies of your work here, allowing you to recover from accidental changes or data loss.

You can browse and restore previous versions through KiCad's File > Local History menu.

To disable this feature: Preferences > Common > Project Backup > Enable automatic backups

Main components on the Garbage Collector

Garbage Collector bill of materials (BOM)

98 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G431RBTX
STM32G431RBTx
U1
1
MPU-6050
U2
1
DRV8833PWP
U3
1
AP2112K-3.3
U4
1
BQ27220
bq27220
U5
1
SN74AHCT1G125DBVR
U6
1
BQ25896RTWR
U9
2
CONN_01X06
Conn_01x06
M1, M2
1
2N7002
Q1
1
Q_PMOS
Q2
1
Q_PNP_CurrentMirror
Q5
1
16M
Y1
1
C573320
APDS1
1
CONN_01X02_PIN
Conn_01x02_Pin
Battery1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
Charging1
2
CONN_01X04_PIN
Conn_01x04_Pin
ESP32, NEOPIXEL1
1
C9900028921
LCSC1
2
~
SW1, SW2
1
CONN_01X03
Conn_01x03
Servo1
3
CONN_01X06
Conn_01x06
TOF1, TOF2, TOF3
Show 23 more
QtyPartRefs
4
STATUS
D1, D2, D3, D4
1
1u
L1
3
10N
10n
C1, C11, C18
1
1u
C2
19
100N
100n
C3, C5, C6, C7, C8, C9, C10, C13 +11
1
4U7
4u7
C4
1
2N2
2n2
C12
2
10P
10p
C16, C17
2
2U2
2u2
C19, C37
1
10U
10u
C20
5
1u
C25, C26, C27, C34, C42
1
47N
47n
C28
1
4U7
4u7
C29
4
10U
10u
C30, C31, C32, C33
1
470N
470n
C35
11
10K
R1, R3, R6, R7, R8, R10, R11, R15 +3
6
2K2
2k2
R2, R13, R14, R21, R22, R27
2
5K1
R4, R5
1
100
R9
1
470
R12
2
200M
200m
R17, R18
2
100K
R24, R25
1
R_Shunt
R26

Garbage Collector design files

The KiCad project lives in the Rouaa-spec/Garbage_Collector_PCB_Design repository on GitHub; these links point at the commit this page was built from.

Garbage Collector: common questions

What microcontroller does the Garbage Collector use?

The Garbage Collector is built around the STM32G431RBTX, from the STM32 family.

How big is the Garbage Collector PCB?

The Garbage Collector measures 78 × 68 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Garbage Collector?

98 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Garbage Collector design files?

From the Rouaa-spec/Garbage_Collector_PCB_Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Garbage Collector design in my own project?

Yes, under the terms of its MIT license, which Rouaa-spec chose for the repository.

Can I test firmware for the Garbage Collector without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards