9 open source boards using the STM32G431RBTX
Real designs built with the STM32G431RBTX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
PM Controller
ZeshuLiu
90 × 61.5 mm118 parts4LCustom license1STM32
Gadas MSE Slave Module
Gady159
229.2 × 100.8 mm533 parts6LNo license0STM32
Motor-Controller
WeymenKoo
70 × 70 mm192 parts6LNo license0STM32
Controller f407
wa1hco
159 × 99 mm120 parts2LGPL-3.00STM32
${DOC TYPE} Document
UVicRocketry
38.1 × 73.1 mm105 parts4LNo license0STM32
Garbage Collector
Rouaa-spec
78 × 68 mm98 parts4LMIT0STM32
Forage
chinatsu
312.7 × 79.4 mm69 parts2LCustom license1STM32
Gadas MSE Master Control
Gady159
50 × 80 mm59 parts4LNo license0STM32
Tensilguard
jayis1
100 × 60 mm12 parts4LNo license0
How designs wire the STM32G431RBTX
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the STM32G431RBTX connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
- The VREF+ pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 1 µF).
- The VDDA pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
- The PG10 pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 470 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 75% |
|
| PF0pin 5 | Connected to: Signal 75% |
|
| PF1pin 6 | Connected to: Signal 86% |
|
| PG10pin 7 | Connected to: A connector 57% |
|
| PC2pin 10 | Connected to: Not connected 71% · a signal 29% | — |
| PC3pin 11 | Connected to: Signal 63% · not connected 38% |
|
| VSSpin 15, 31, 47, 63 | Connected to: GND 100% | — |
| VDDpin 16, 32, 48, 64 | Connected to: 3.3V 100% |
|
| PA5pin 19 | Connected to: A connector 29% |
|
| PA6pin 20 | Connected to: Signal 86% |
|
| PB1pin 25 | Connected to: Not connected 63% · a signal 38% | — |
| VSSApin 27 | Connected to: GND 88% | — |
| VREF+pin 28 | Connected to: Signal 63% · 3.3V 25% |
|
| VDDApin 29 | Connected to: 3.3V 57% · a signal 43% |
|
| PC8pin 40 | Connected to: A connector 43% |
|
| PC9pin 41 | Connected to: A connector 43% |
|
| PB8pin 61 | Connected to: Signal 86% |
|
41 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Forage by chinatsu, PM Controller by ZeshuLiu, Gadas MSE Master Control by Gady159 and Tensilguard by jayis1.
The STM32G431RBTX in open source designs
The gallery holds 9 open source boards using the STM32G431RBTX from 8 GitHub repositories; a typical one measures about 90 × 73.1 mm and carries around 105 components.
78% use four copper layers or more, and 22% carry an open source license.
The most starred is PM Controller by ZeshuLiu.
Microcontrollers on boards using the STM32G431RBTX
What boards using the STM32G431RBTX are built for
STM32G431RBTX: common questions
Where can I find a STM32G431RBTX reference design?
Each of the 9 boards on this page is a real design using the STM32G431RBTX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32G431RBTX VDD pin?
The VDD pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G431RBTX.
How is the STM32G431RBTX VREF+ pin connected?
The VREF+ pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G431RBTX.
What decoupling capacitors do designs use on the STM32G431RBTX VDDA pin?
The VDDA pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G431RBTX.
Which microcontrollers do boards using the STM32G431RBTX use?
Most are built on STM32 (9).
How big is a typical board using the STM32G431RBTX?
The median is 90 × 73.1 mm, and 22% are two-layer designs.
What is the most popular open source board using the STM32G431RBTX?
By GitHub stars, PM Controller by ZeshuLiu, with 1 stars.
Can I simulate one of these boards using the STM32G431RBTX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.