DSKY-keyboard replica
rrainey·DSKY-keyboard-replica·pcb/DSKY_keyboard.kicad_pcb
About the DSKY-keyboard replica PCB
DSKY-keyboard replica is an open source Microchip SAM PCB design by rrainey, published on GitHub under the Custom license license. It is a 2-layer board measuring 168.9 × 71.1 mm, with 54 components from 14 distinct parts.
Its main chip is the ATSAMD21E, from the Microchip SAM family. Other key parts include the AP2112K-3.3 and AQY232SZ. By type, the board carries 21 resistors, 19 switches, 4 capacitors, 3 ICs, 2 jumpers and 2 diodes.
It belongs with the keyboards designs in this gallery.
From the project
This is a scale functional replica of the keyboard for the Apollo Guidance Computer. It is implemented using modern components. The hardware in this project is designed to be part of a larger replica of the Display and Keyboard (DSKY) module of the AGC.
This is a scale functional replica of the keyboard for the Apollo Guidance Computer. It is implemented using modern components. The hardware in this project is designed to be part of a larger replica of the Display and Keyboard (DSKY) module of the AGC.
This keyboard is capable of communicating to a controlling computer (a Raspberry Pi 3 or 4 in my case) via either a USB or I2C communications interface. The board is controlled by a ATSAMD21 processor. The LP11OA1TBSRG key switches include green backlighting LEDs, which are controlled by the ATSAMD processor.

Main components on the DSKY-keyboard replica
DSKY-keyboard replica bill of materials (BOM)
54 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD21E | QFN32_5MM | IC1 |
| 1 | AP2112K-3.3 | SOT23-5 | U1 |
| 1 | AQY232SZ | SO-4_4.4x4.3mm_P2.54mm | U2 |
| 1 | reset | BTN_KMR2_4.6X2.8 | Q1 |
| 1 | 4U#20329 | 4UCONN_20329_V2 | CN1 |
| 1 | HEADER-1X576MIL | 1X05_ROUND_76 | JP1 |
| 1 | 3221-10-0300-00-TR | 3221-10-0300-00-TR | JP2 |
| 19 | LP11OA1TBSRG | LP11OA1TBSRG | S1, S2, S3, S4, S5, S6, S7, S8 +11 |
| 1 | green | CHIPLED_0603_NOOUTLINE | PWR1 |
| 2 | SCHOTTKY 30V | SOD-123FL | D1, D2 |
| 2 | 1uF | 0603-NO | C1, C4 |
| 2 | 10uF | 0805-NO | C2, C3 |
| 20 | 1.5K | 0603-NO | R1, R2, R3, R4, R5, R6, R7, R8 +12 |
| 1 | 1.1K | 0603-NO | R20 |
DSKY-keyboard replica design files
The KiCad project lives in the rrainey/DSKY-keyboard-replica repository on GitHub; these links point at the commit this page was built from.
DSKY-keyboard replica: common questions
What microcontroller does the DSKY-keyboard replica use?
The DSKY-keyboard replica is built around the ATSAMD21E, from the Microchip SAM family.
How big is the DSKY-keyboard replica PCB?
The DSKY-keyboard replica measures 168.9 × 71.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DSKY-keyboard replica?
54 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the DSKY-keyboard replica design files?
From the rrainey/DSKY-keyboard-replica repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DSKY-keyboard replica design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the DSKY-keyboard replica without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416