XIAO nRF52840 Breakout
rroels·XIAO_nRF52840_Breakout
About the XIAO nRF52840 Breakout
XIAO nRF52840 Breakout is an open source Nordic nRF PCB design by rroels, published on GitHub. It is a 2-layer board measuring 17.8 × 35.7 mm, with 12 components from 7 distinct parts.
Its main chip is the Seeed Studio XIAO nRF52840, from the Nordic nRF family. By type, the board carries 10 connectors, 1 IC and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Small breakout board for the Seeed XIAO nRF52840
This repository contains a small breakout board for the Seeed XIAO nRF52840.
Note that there exists an official XIAO expansion board: https://wiki.seeedstudio.com/Seeeduino-XIAO-Expansion-Board/
However, for my projects this was not sufficient because:
it does not break out all pins on the underside of the XIAO the expansion board takes away some of the already limited pins for the OLED, buzzer, buttons, ... * some pins are exposed in their grove connector format, which is not always desired

Main components on the XIAO nRF52840 Breakout
XIAO nRF52840 Breakout bill of materials (BOM)
12 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Seeed Studio XIAO nRF52840 | XIAO-nRF52840-Sense-14P-2.54-21X17.8MM | U1 |
| 1 | 53261-0271 | 532610271 | J1 |
| 2 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J2, J3 |
| 4 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J4, J8, J9, J10 |
| 2 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J5, J7 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J6 |
| 1 | SW_Push | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1 |
XIAO nRF52840 Breakout design files
The KiCad project lives in the rroels/XIAO_nRF52840_Breakout repository on GitHub; these links point at the commit this page was built from.
XIAO nRF52840 Breakout: common questions
What microcontroller does the XIAO nRF52840 Breakout use?
The XIAO nRF52840 Breakout is built around the Seeed Studio XIAO nRF52840, from the Nordic nRF family.
How big is the XIAO nRF52840 Breakout?
The XIAO nRF52840 Breakout measures 17.8 × 35.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XIAO nRF52840 Breakout?
12 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the XIAO nRF52840 Breakout design files?
From the rroels/XIAO_nRF52840_Breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XIAO nRF52840 Breakout design in my own project?
The repository has no license, so all rights stay with rroels. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the XIAO nRF52840 Breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381