Ambient rgb led

RRomaNN·ambient-rgb-led·kikad_ki/ambient/ambient.kicad_pcb

Ambient rgb led PCB layout, top view — open source AVR/Arduino board by RRomaNN

About the Ambient rgb led PCB

Ambient rgb led is an open source AVR/Arduino PCB design by RRomaNN, published on GitHub. It is a 2-layer board measuring 90 × 36 mm, with 45 components from 28 distinct parts.

Its main chip is the ATmega328P-PU, from the AVR/Arduino family. Other key parts include the AT24C256. By type, the board carries 16 resistors, 13 capacitors, 3 connectors, 3 diodes, 2 ICs and 2 switches.

It belongs with the displays & leds designs in this gallery.

From the project

This is a prototype of the LED backlight controller.

This is a prototype of the LED backlight controller.

you can upload an image (ie pattern) from the computer to the device. The pattern will be read row by row by the controller and rows will be sequentially displayed on the addressable LED strip using the selected color schema with preselected speed and smooth color transitions between the rows.

- Supports up to 16 patterns, stored in 4x AT24C256 EEPROMs. You can interactively select one of them at a time. - Supports up to 32 custom color schemas. You can create/edit/save them to EEPROM directly on the device using buttons, LCD and the…

Ambient rgb led, from the project README
From the project README

Main components on the Ambient rgb led

Ambient rgb led bill of materials (BOM)

45 components, 28 distinct parts.

QtyPartRefs
1
ATmega328P-PU
U1
1
AT24C256
U2
1
MMBT3904
Q1
1
16 MHz
Y1
1
5V DC
J1
1
Display
J2
1
LED Array
J3
1
20k
RV1
1
Next
SW1
1
Select
SW2
1
Blue LED
LED1
1
Green LED
LED2
3
1N4735A
D1, D2, D3
1
47u
L1
2
100u 25V
C1, C2
9
0.1u
C3, C4, C7, C8, C9, C10, C11, C12 +1
2
22
C5, C6
1
1M
R1
1
10k
R2
1
100
R3
Show 8 more
QtyPartRefs
2
5.1k
R4, R6
2
200
R5, R7
1
100k
R8
1
2k
R10
2
1k
R11, R18
2
4.7k
R12, R13
1
470
R19
2
0.02
R20, R21

Ambient rgb led design files

The KiCad project lives in the RRomaNN/ambient-rgb-led repository on GitHub; these links point at the commit this page was built from.

Ambient rgb led: common questions

What microcontroller does the Ambient rgb led use?

The Ambient rgb led is built around the ATmega328P-PU, from the AVR/Arduino family.

How big is the Ambient rgb led PCB?

The Ambient rgb led measures 90 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ambient rgb led?

45 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ambient rgb led design files?

From the RRomaNN/ambient-rgb-led repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ambient rgb led design in my own project?

The repository has no license, so all rights stay with RRomaNN. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ambient rgb led without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards