5 open source boards using the AT24C256
Real designs built with the AT24C256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
ReST32 Main
berryelectronics
100 × 100 mm168 parts2LNo license7RP2040/RP2350
Ppse hardware
4137314
102.2 × 77.2 mm134 parts2LGPL-3.01AVR/Arduino
Ambient rgb led
RRomaNN
90 × 36 mm45 parts2LNo license0RP2040/RP2350
Pump board
TrendBit
90 × 100 mm181 parts4LGPL-3.00I^{2}C EEPROM Click
michpro
25.4 × 28.6 mm12 parts2LCERN-OHL-P-2.05
How designs wire the AT24C256
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AT24C256 connects to, and the resistors, capacitors and other passives placed on it.
- The A0 pin is tied to GND on 4 of 5 designs.
- The A1 pin is tied to GND on 4 of 5 designs.
- The SDA pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ.
- The SCL pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: GND 80% · a signal 20% | — |
| A1pin 2 | Connected to: GND 80% · a signal 20% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| SDApin 5 | Connected to: The microcontroller 80%, a connector 60% |
|
| SCLpin 6 | Connected to: The microcontroller 80%, a connector 60% |
|
| WPpin 7 | Connected to: GND 60% · a signal 40% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ReST32 Main by berryelectronics, I^{2}C EEPROM Click by michpro, Ppse hardware by 4137314 and Ambient rgb led by RRomaNN.
The AT24C256 in open source designs
The gallery holds 5 open source boards using the AT24C256 from 5 GitHub repositories; a typical one measures about 90 × 77.2 mm and carries around 134 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is ReST32 Main by berryelectronics.
Parts used alongside the AT24C256
Microcontrollers on boards using the AT24C256
What boards using the AT24C256 are built for
AT24C256: common questions
Where can I find a AT24C256 reference design?
Each of the 5 boards on this page is a real design using the AT24C256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AT24C256 A0 pin connected?
The A0 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AT24C256.
How is the AT24C256 A1 pin connected?
The A1 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AT24C256.
What pull-up resistor is used on the AT24C256 SDA pin?
The SDA pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 5 open source designs using the AT24C256.
Which microcontrollers do boards using the AT24C256 use?
Most are built on RP2040/RP2350 (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the AT24C256?
The median is 90 × 77.2 mm, and 80% are two-layer designs.
What is the most popular open source board using the AT24C256?
By GitHub stars, ReST32 Main by berryelectronics, with 7 stars.
Can I simulate one of these boards using the AT24C256 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.